|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Quote:
|
|
#2
|
|||
|
|||
|
Could they have lowered the HP and increased the Torque because it's a heavy SAC? Less high-end on the revs and more grunt down in the lower end?
Quote:
|
|
#3
|
||||
|
||||
|
Quote:
|
|
#4
|
||||
|
||||
|
Correction
My bad. They did not say exactly what the hp would be on the V8. Salesguy is thinking 407 is on the light side and it would probably be in the 450 range. I repeated what I was told at the consumer group I went to a few months back.
I6 is correct at 360 hp.
__________________
![]() Current: 2016 X6 ///M Black Sapphire Metallic |
|
#5
|
|||
|
|||
|
Quote:
|
|
#6
|
||||
|
||||
|
Quote:
|
|
#7
|
|||
|
|||
|
Quote:
M3 engine is a much higher state of tune than the V8 TT that will go in the X5. It's a completely different engine and has very different characteristics it's tuned to produce high horsepower at high revs to the detriment of torque which is not what you want in the X5. A good comparison would be the 335i and the 330i....the twin turbo engine there only produces 30bhp more. It does however produce 400 nm of torque at 1300 rpm versuse 320 nm at 2750 rpm which is a huge difference. |
![]() |
| Bookmarks |
|
|
|
|