AFE Cold Air Intake Kit for e53 for 00-05 4.4 & 4.8is

AlpineMsix · #1 06-08-2008, 09:26 PM

For Sale, in perfect condition AFE Cold Air intake kit that came off my 2005 4.8is. I returned the car(lease) and had this kit laying around, when I finally realized I should probably sell it..

This kit will give your X5 a nice growling/screaming sound at higher rpms at Wide open throttle, and id say gives you a bit more power after 4.5k rpms, could be just the nice growl though

makes it sound amazing in my opinion.

This kit is kept in perfect condition, by that I mean I wiped down the heat-shield almost every time I washed the car and the filter was changed twice, I never really wanted to clean/wash the air filter, so I just purchased a new one. The filter that you will be getting probably has 10,000miles on it, not more. As you can see its still kinda of bluish, and isnt dirty and or completely black

This kit comes with what you see in the picture, and is really easy to install, took me about an hour at most, to install and to remove.

The price for this kit is 380$, Im selling it for 275$ shipping is on me. PM me for more details and if your interested.

Sponsored Links

RichiRich · #2 06-08-2008, 11:38 PM

Whats up Vlad! I hope all is well with you and the M!

Someone has to byte on this...if I already did not have this MOD....we would be PAypaling again!

Good Luck!

RR

AlpineMsix · #3 06-10-2008, 05:18 PM

or best offer? bump

edco · #4 06-11-2008, 05:16 PM

Would it add anything to an 06 3.0?
Ed

mrbmwx5 · #5 06-11-2008, 06:30 PM

Quote:

Originally Posted by edco

Would it add anything to an 06 3.0?
Ed

ED! you mean HP?
let me anwser it for him ,no HP added just better look and sound ....

edco · #6 06-11-2008, 07:47 PM

Quote:

Originally Posted by mrbmwx5

ED! you mean HP?
let me anwser it for him ,no HP added just better look and sound ....

Thanks. I really liked the way it looked on Stan's (or was it Richi's) when I saw it on Sat in CT, but I cant afford to spend that kinda money now.. thanks for letting me dream a little..

Plus I dont know how to install it...It also states for 00-05 and 4.4-4.8L. Will it even fit my car?

Does it do anything to the warranty, ie to you have to remove it for warranty service..just wondering..

Thanks
ED

BruinMan · #7 06-11-2008, 08:14 PM

Just bought this from another X5World member today.
Here is some info that might help your sale.

Stage 1 Cold Air Intake System Type Cx
BMW X5 E53 (01-06) V8-4.4L 4.8L

Increases horsepower & torque.
Maximizes airflow for better acceleration and responsiveness
Improved performance results in greater fuel efficiency
Installs in less than 60 minutes using factory mounting points
No cutting or drilling to engine compartment is required
Replaces OE air filter with high flow high performance 360 degree radial flow air filter
Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed
Replaces factory air box with a heat-blocking shield that seals to the hood
Limited lifetime warranty

mrbmwx5 · #8 06-11-2008, 09:55 PM

Quote:

Originally Posted by edco

Thanks. I really liked the way it looked on Stan's (or was it Richi's) when I saw it on Sat in CT, but I cant afford to spend that kinda money now.. thanks for letting me dream a little..

Plus I dont know how to install it...It also states for 00-05 and 4.4-4.8L. Will it even fit my car?

Does it do anything to the warranty, ie to you have to remove it for warranty service..just wondering..

Thanks
ED

1)it will not fit your 3.0i
2)installation is very easy ( scale 1---10 ) for me i say 1 on the scale.
3)if you have air MASS fail or anythings invole in the intake or fuel system it will void the warranty.( remove it befor get the service done)
4)If you want axtra HP for 3.0 you need to go for supercharge
5) the company always say it will Increases horsepower & torque
but for me it no promise effect.(included my k&n system in my X right now)

Bimmer360 · #9 06-12-2008, 02:01 AM

Bruinman,
I had the same one on my 4.4 and went back to stock. The reason? No HP gain at all and the roar isn't that much of a difference. You will see once you installed it.

Quote:

Originally Posted by BruinMan

Just bought this from another X5World member today.
Here is some info that might help your sale.

Stage 1 Cold Air Intake System Type Cx
BMW X5 E53 (01-06) V8-4.4L 4.8L

Increases horsepower & torque.
Maximizes airflow for better acceleration and responsiveness
Improved performance results in greater fuel efficiency
Installs in less than 60 minutes using factory mounting points
No cutting or drilling to engine compartment is required
Replaces OE air filter with high flow high performance 360 degree radial flow air filter
Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed
Replaces factory air box with a heat-blocking shield that seals to the hood
Limited lifetime warranty

Bimmer360 · #10 06-12-2008, 02:03 AM

to add to this, this will FAIL your SMOG TEST, so make sure you go back to stock before doing the test (this is for the buyer).

Quote:

Originally Posted by mrbmwx5

1)it will not fit your 3.0i
2)installation is very easy ( scale 1---10 ) for me i say 1 on the scale.
3)if you have air MASS fail or anythings invole in the intake or fuel system it will void the warranty.( remove it befor get the service done)
4)If you want axtra HP for 3.0 you need to go for supercharge
5) the company always say it will Increases horsepower & torque
but for me it no promise effect.(included my k&n system in my X right now)

Sponsored Links