|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
I Bus TCU retrofit in a K Bus car
I've searched but I can't find a definate answer. The Vehicle I have (E46 MY1999) is fitted with the 17 pin audio connector, 1 DIN navigation and steering wheel buttons which all use the K Bus. This is the "lowline" setup that was replaced with an I and K bus after 2001 with the flat pin quadlock system. The TCU I have is a 2004 model which uses the I Bus (it says this on the label). 1) Can I connect the TCU to the K Bus? They appear to use the same protocol but with an extended command set in the I Bus. 2) Will I get the caller ID on the K Bus navigation unit? I have a MK3 GPS computer. 3) Will my K Bus wheel buttons work with the I Bus TCU? or 4) Do I need to change to a later LCZ with an I bus/K bus gateway function? Thanks for any assistance |
Sponsored Links | |
|
#2
|
|||
|
|||
Quote:
2) Yes, but dependent on phone used 3) Yes PS: use NavCoder to code the TCU.... |
#3
|
|||
|
|||
Quote:
2) AWESOME! 3) See 2. Navcoder will be used, I need it1 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|