|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Seeking E46 BT retrofit instuctions
Can anyone point me to the PDF or a photo installation af a ULF/TCU bluetooth retrofit that specifcally includes the wiring harness connections and routing? Online I can only find retrofits for US market cars that will all have the loom factory fitted, or for the X5 which has different points of connection to the car. Thanks
|
| Sponsored Links | |
|
|
|
|
#2
|
|||
|
|||
|
Anybody? Links to the E46 BT harness retrofit? Not the bimmernav modules retrofit. Thanks!
|
|
#3
|
|||
|
|||
|
What year car?
I've never seen shots of having to install the actual harness routing, though there's plenty of info on installing car PC harness, and that is where I would start, if I wanted to route cables.. for a pre 03/2002 = BigPatsFans.com for a post 03/2002= BMW Bluetooth installation instructions for e46 3 series Don't know if this is at all helpful though.. |
|
#4
|
|||
|
|||
|
The car is a 99, but I am looking mainly for where the harness plugs in and runs up front. I know it goes through the rear firewall and under the passenger seat, but from there where does it connect in for power, speed, reverse, illumination, iBus etc etc..
I saw those links, and I found the X5 cable harness routing, but it plugs in to X400 in the rear of the car, which my car and retrofit harness does not have. |
|
#5
|
|||
|
|||
|
Have you examined all the wiring and intermediate plug picture locations in the WDS? Do you need the I bus or only the K bus connection? The K is in the center dash consol.
|
|
#6
|
|||
|
|||
|
I need to plug this in up front somewhere. It has power, ibus, speed sensor etc on it.
![]() The harness is 61120143309.
|
![]() |
| Bookmarks |
|
|
|
|