Ice-Link Plus

[FigsX5]

Does anyone know where I should tap into so that I can provide 12 volts, which feeds the power supply for the DSP Converter kit? I was told purple/white = positive and brown = negitive...please help.

[UCrewX5]

Originally Posted by FigsX5

Does anyone know where I should tap into so that I can provide 12 volts, which feeds the power supply for the DSP Converter kit? I was told purple/white = positive and brown = negitive...please help.

There is a 3 pin cable that goes to the CD changer (and will need to be connected to the IceLink) that is comprised of a +12V, ground and i-bus lead. Tap the 12V lead (a multimeter test set should quickly tell you which one is 12V)

:xoutpost:

[Tom G.]

Originally Posted by FigsX5

Does anyone know where I should tap into so that I can provide 12 volts, which feeds the power supply for the DSP Converter kit? I was told purple/white = positive and brown = negitive...please help.

If you cannot find the correct wire, you can use the fuse panel on the pass side - nothing on the bar is switched 12V power. The power draw is very minimal, I wouldn't worry about it.

[bindieye]

Hi Tom,
Do you have a preferrred fitter here in Australia, or is it best to go to the dealers? thanks for all your help re the Icelink.

[Tom G.]

Originally Posted by bindieye

Hi Tom,
Do you have a preferrred fitter here in Australia, or is it best to go to the dealers? thanks for all your help re the Icelink.

No one I can personally recommend in Australia, but any 12V installer should be able to perform the install for you in under an hour.

[powers1]

Originally Posted by Tom G.

No one I can personally recommend in Australia, but any 12V installer should be able to perform the install for you in under an hour.

I am also interested in your Ice>link plus.I have a 2003 3.0 D with DSP and CD Changer.Would you please PM me some installation info, prices and shipping to POrtugal....

Many thanks
Fernando

[Tom G.]

Originally Posted by powers1

I am also interested in your Ice>link plus.I have a 2003 3.0 D with DSP and CD Changer.Would you please PM me some installation info, prices and shipping to POrtugal....

Many thanks
Fernando

Fernando,

This forum has probably better instructions than what I can offer, here is a link to the instructions from hayaku: http://www.xoutpost.com/articles/x5/s...ll-bmw-x5.html

As for shipping, feel free to email me your shipping address and I will be happy to provide a quote. I can be reached at [email protected]

[powers1]

Originally Posted by Tom G.

Fernando,

This forum has probably better instructions than what I can offer, here is a link to the instructions from hayaku: http://www.xoutpost.com/articles/x5/s...ll-bmw-x5.html

As for shipping, feel free to email me your shipping address and I will be happy to provide a quote. I can be reached at [email protected]

You are right ,the article by Hayaku is excellent.Just PM ed you.