Bumblebee Question

[xnsf]

i thought it would come with it already mirrored image

in the instructions, it says that i MAY get a mirror image connecting the black and green.

do other current bumblebees come with the mirror image fixed?

[Tom G.]

Originally Posted by xnsf

i thought it would come with it already mirrored image

in the instructions, it says that i MAY get a mirror image connecting the black and green.

do other current bumblebees come with the mirror image fixed?

It's mirrored from factory - we don't have a need for non-mirrored since it is primarily used as a reverse camera.

[xnsf]

okay...i'll get back to you tomorrow if i find whatever isn't working the opposite of what i want

thanks for the help

[xnsf]

i'm not sure my camera has a mirror image...

i plugged in my digital camera that uses 3.5mm to RCA also, and the picture is not mirrored either

i contacted Garmin about this, and they have yet to have responded

...oh well...i'll just wait

[Tom G.]

The camera should be mirrored - if you have an A/V input in your TV, you can verify this.

[xnsf]

i just tried it with a projector and used a digital camera as the control experiment

the bumblebee isn't mirroring the image

this is what i'm seeing when i use a digital camera and the bumblebee

this is with the digital camera

this is how i've connected the wires

the green wire isn't connected to anything



if i do connect the green wire to the black one (as per manual)



flickering image

the problem may just be me not knowing how to connect those wires to make it mirrored...

any suggestions?

[Tom G.]

Originally Posted by xnsf

i just tried it with a projector and used a digital camera as the control experiment

the bumblebee isn't mirroring the image

the problem may just be me not knowing how to connect those wires to make it mirrored...

any suggestions?

The camera is not switchable, it is in a fixed mirror position. Please contact me via email with your full name and we'll try to run down your possibilities

[xnsf]

don't know what you guys did, but it's working perfectly now!

thanks again!