Help:Dice install w/DSP

[Johnnya]

I trying to install my Dice unit w/ DSP converter.

I need to find a 12V switched circuit for the DSP converter.

Any idea where can I find a switch 12V in the back ?

I have only found constant 12V.

Thanks in advance

[Tom G.]

Originally Posted by Johnnya

I trying to install my Dice unit w/ DSP converter.

I need to find a 12V switched circuit for the DSP converter.

Any idea where can I find a switch 12V in the back ?

I have only found constant 12V.

Thanks in advance

Look for a purple wire with a white stripe - this will be your +12V switched power source. This will typically be found on the telephone wiring bundle in the cargo area.

[DouglasABaker]

15 pin connector to the DSP amplifier has a white wire in the middle. That is your switched power.

Doug

[Tom G.]

It's best to stay away from any amplifier wiring as they are quite expensive to replace if something goes wrong. There is a purple wire with a white stripe in the telephone bundle next to the amp, this can be used for +12V power.