|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Quote:
|
|
#2
|
||||
|
||||
|
Hello,
You did a great job on the sub box, have you thought about spraying the box with the stuff they spray in the back of pickup trucks for liners? It would be durable and you can get it in several colors like black, gray & etc...... I have a 2001 X-5 with a Non DSP system and I am going to use a factory subwoofer from an X-5 with DSP system that I bought and install it in my vehicle. The approach will be similar to yours except you fabricated your box and I am using the OEM Sub. Would you please forward me the color codes of the wires you used and perhaps provide some close up picture of the wires you used to tap into? Did you use the high level output from the Stereo Head Unit to the Amp or did you use the wires going from the amp to the speakers? Also, did you use the wires from the front speakers or the rear? I wish they sold a aftermarket audio cable and connector that was a plug and play unit for a Non DSP stereo to hook up a amplifier and subwoofer, but I have not been able to find one for Non-DSP. Please advise. |
|
#3
|
|||
|
|||
|
Looks like you did some nice work... since 1/2" is a bit on the thin side, and since you could use some more volume, you might consider fiberglass for the rear "tub" of your next box....
|
|
#4
|
|||
|
|||
|
you read my mind.
|
|
#5
|
||||
|
||||
|
one more question. When you say 3 inch lip was that fromfront or back. Im going to fiberglass the rear part of this box and use your design for rest of box. Can you PM the exact specs, measurements or plans for the pieces you used? Did you counter sink woofer at all? I assume not because it is 1.2 mdf. Did you use poly fil? Also, i think i want to use a kicker solobaric l7 8, so i wonder if that changes reqirements at all
|
|
#6
|
|||
|
|||
|
Can you post the exact dimensions of the board you used in this project??? Thanks a bunch! a 8" driver would work for me!
|
|
#7
|
||||
|
||||
|
Quote:
|
|
#8
|
|||
|
|||
|
Very nice work you did there
![]() Great minds think a like!
__________________
2009 E70 X5 - Third Row - Rear DVD Past - 04 4.4i Sport Package |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|