DICE Silverline iPod Playlist order

[Tom G.]

Originally Posted by 930LDR

Additionally my new silverline stops the ipod when it reaches the end of a playlist rather than cycling back to the beginning. 'Stopped' appears on the screen and it just sits there.

This is normal operation as the iPod is pausing when reaching the end of the Playlist, not the DICE.

[930LDR]

Doesn't seem to be normal operating order anyother time that I use my ipod. I could be wrong as I haven't specifically tried this but if memory serves it simply cycles right back to the first song in the playlist. It isn't a momentary thing but rather it just stops and sits there.

[Tom G.]

Originally Posted by 930LDR

Doesn't seem to be normal operating order anyother time that I use my ipod. I could be wrong as I haven't specifically tried this but if memory serves it simply cycles right back to the first song in the playlist. It isn't a momentary thing but rather it just stops and sits there.

It would if repeat settings were sent to ALL. The DICE may handle it differently - we'll do some testing to verify on the bench.

[930LDR]

Bingo... just tried it. I have mine set to Repeat All. DICE doesn't seem to recognize this setting.

Thanks

[Tom G.]

Originally Posted by 930LDR

Bingo... just tried it. I have mine set to Repeat All. DICE doesn't seem to recognize this setting.

Thanks

Seems you're asking the same question on 2 separate threads.

I'll forward the issue to DICE's technicians and see if they are looking to change this.

[Kris@modmynav]

Originally Posted by Tom G.

It would if repeat settings were sent to ALL. The DICE may handle it differently - we'll do some testing to verify on the bench.

it does repeat, once I setup my repeat setting as "ALL", but only works while engine is running.
if I turn off engine and start again, I need to setup the repeat setting again.

[Tom G.]

Originally Posted by wuzin

it does repeat, once I setup my repeat setting as "ALL", but only works while engine is running.
if I turn off engine and start again, I need to setup the repeat setting again.

This would be the case with the RND feature - it is can canceled out when turning off the vehicle or switching to a different mode.

[Kris@modmynav]

Originally Posted by Tom G.

This would be the case with the RND feature - it is can canceled out when turning off the vehicle or switching to a different mode.

what is RND feature?
so there is no way to keep setting as "Repeat All" option?

[Tom G.]

Originally Posted by wuzin

what is RND feature?
so there is no way to keep setting as "Repeat All" option?

RND = Random. This will shuffle the Artist/Playlist or Album (depending on browsing mode you are in). If this is changed, you must press the RND key again to enable the feature.

[930LDR]

Did you ever get any resolution to the playlist order issue with the silverline?