Ice link Help

[VF1-X5]

I just installed ice link plus into my nnav/ndsp X5. when i hit the 6 button to access the menu it does nothing. and does anyone have the firmware update patch they could send me. Your Help is TRULY appreciated

[vendettabmw]

Originally Posted by VF1-X5

I just installed ice link plus into my nnav/ndsp X5. when i hit the 6 button to access the menu it does nothing. and does anyone have the firmware update patch they could send me. Your Help is TRULY appreciated

yr supposed to hold it down, i believe. email at [email protected] and i can fwrd the email from dension they sent me to used and i figured it all out in about 10mi9n. and i suck w/tech stuff. i have same set up as u, i love it, but sometimes it turns to radio, no biggie i just hit source(cd cnanger again)...takes a few minutes of foolin with to get it all down, press 6 till you see stuff happen then skip, then fast fwrd..to select etc.

[VF1-X5]

Email address sent thanks

[Tom G.]

Originally Posted by VF1-X5

I just installed ice link plus into my nnav/ndsp X5. when i hit the 6 button to access the menu it does nothing. and does anyone have the firmware update patch they could send me. Your Help is TRULY appreciated

Where was the icelink purchased from and what firmware version do you currently have? This is very important before applying an update.

Here are the procedures for determining your firmware version on your ice>Link Plus:

Turn the key to the on position and select your CD Changer. Once you are in this mode, plug in the iPod to the Active Cradle or Docking cable. During the warning screen, the firmware version can be spotted by looking at the number in the top right corner of the iPod.

I will need this number before we can continue.

[VF1-X5]

ICeLInk Problem Solved Thanks to all Who helped me out on this one, Ice LInk is Awesome once everything is up and running.