AudioControl LC6 work with DSP system?

[el_duderino]

Originally Posted by chefwong

Hey Kenneth -

It's been awhile since we last chatted. I am still on the 2904 / Rev/Seas route. So far, the only piece to the puzzle I have decided on is the H701 processor + triplet dual genny monos. One of them is reallly nice - dual monos in a single genny chassis (it's not something common u see here stateside) vs. the UK.

Drivers - the same guy that sold me his gennys, he may have some Absolute D1 and W18 drivers which is a ++++ for me. I'm not so sure on the tweeter but the 18W is definately a better match than the DIY driver . It's coated, and the Qts rating on it's better.


So....send me some feedback on the getting a clean pre-amp signal. Stock amp does not exist, it's non DSP. The H701 processor looks like it may take the feeds straight from the HU. I may throw a SLBR4 and TP4 into the equation but I would prefer keeping things as minimal in the chain as possible.
The H701 is rated at 4V output - just gotta see if it' a true 4V out.

Hehe, thanks for the update, but I was meaning to ask the original poster from Asia : )

The tips are all in the other post.
Tap the (+) and (-) at the amp, connect them to your RCA, and put a transformer-based ground loop isolator in there. I'd use the Jensen IsoMax for EMI rejection due to its metal cans. There was more drive this way too.