Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > Electronics > Mobile Electronics Forum
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8  
Old 08-24-2012, 11:23 AM
TerminatorX5's Avatar
Member
 
Join Date: Jul 2006
Location: Stafford, VA & Harrisburg, PA - USA
Posts: 5,736
TerminatorX5 is on a distinguished road
Abu,

the wires in the PDC module carry signals, so you cannot use that relay that you have. The signals do NOT have enough power/stenghth to activate that relay, and if you connect that relay to any wire in the PDC circuitry, you will disrupt the operation of the PDC and probably something else in the car.

You need to use smaller relays in order achieve your goals (see the picture and the datasheet for the relay). I would suggest getting the sensitive relay with 17mA triggering amperage, but even the regular with 37mA will work.

To pull the ground signal for your trigger wire, you need to tap into PIN 7 of the X300 plug on the PDC module (middle plug out of the three plugs on the module), that pin supplies (+) to the front of the car. Feed that tapped connection to the coil of the relay and use the trip contacts to supply your needed ground to the trigger wire.

For the power to the camera you can use a second relay and find any ignition hot wire in the trunk lid, tap into that wire for the coil of the relay, and use the trip contacts of the relay to feed directly BATTERY power to the camera - do not use any wires that you are tapping into for the power source, as that will disrupt the operation of the original equipment and will not provide sufficient power for your aftermarket equipment - most loads in the BMWs are balanced loads and any diviation from the prescribed voltages or amperages will result in undesirable operation.
Attached Images
 
Attached Images
File Type: pdf OUAZ-SS-112D,900-Tyco-Electronics-datasheet-12299.pdf (77.4 KB, 505 views)
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 04:15 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.