Intravee II Installation help

barryb97 · #1 12-04-2009, 12:38 AM

I have an 01 X5 with DSP, no Nav, no CD changer. When I went to connect my Intravee II I find two free iNet connectors but no analog input connector. There is a small coax but it is hooked up to something. I tried unhooking it and the radio still works. Do I need a digital to analog converter? It was so easy in my Z4. There is a small box (antenna?) installed up on the sidewall that has two small coax cables connected to it. I'm not sure what this does. I'm confused.

RichardP1 · #2 12-05-2009, 08:12 AM

Where does the other end of the coaxial cable shown in the first photo goto? It's not likely to be the cable shown in the 2nd photo.

barryb97 · #3 12-05-2009, 12:14 PM

It looks like it goes to the module in the picture on the bottom left. But I can't trace it all the way without taking the side panel off. I did use an Ohm meter between it and the coax in the other picture and they are not the same line.