|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
Factory Radio - Power, but no sound
I purchased my 2002 X5 with factory Nav and DSP used in Dec of 2009. At the time I bought it, there is no sound coming from the radio. The radio turns on. It will lock into a station. The RDS works. Just no sound. When I purchased the car, the PO told me that he had the Nav drive out for a while while looking for a replacement. He also disconnected the battery a day or two prior to my purchasing the car in an attempt to "reboot" the system. Following these two events (whether they are important or not, I don't know) the radio stopped putting out sound. Any ideas on possible causes before I spend 3 bills on a used DSP amp on eBay? Does the amp need to be recoded at the dealer, possibly? I've disconnected the 3 connectors going to the amp and sprayed them will electrical contact cleaner/enhancer. Did not solve the problem. I checked the radio fuse in the fuse panel in the right side of the cargo area and it is fine. Any ideas or assistance would be greatly appreciated. Cheers, FLi Last edited by FLi GLi; 02-12-2010 at 12:51 AM. Reason: spelling error |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
I hope somebody knows, because I apparently did the same thing to my own yesterday. I was trying to fix my dead TCU problem, and disconnected the battery as part of that effort (didn't work). However, after I was done, my radio is doing exactly what you describe. HELP!!!
__________________
|
|
#3
|
|||
|
|||
|
For all of you following along at home, the problem was a dead amp. Apparently it didn't like the bath the PO gave it.
Got a used one off Ebay and installed it last night. Works great. Cheers, FLi |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|