Best Area to tap in to switched power Icelink

[dane]

Finally, thanks to Tom am getting the dsp converter that might be needed for sound on my icelink. If anyone has any suggestions or ideas of where to tap in power for the dsp converter in a 12/03 production x3. I would prefer it being switched.
I would appreciate any adivce before I tap wires.

[COrth]

Click on hyperlink See my recent post in this forum This solution is switched.

[dane]

like that idea a lot, will try and make one like that but before that just want to be sure if I do need dsp converter in my car by trying to tap it or connect it with a fuse, if that is the cause of sound not working than will build a cable like yours.
Wish someone was selling the modified cable

[Tom G.]

Originally Posted by dane

like that idea a lot, will try and make one like that but before that just want to be sure if I do need dsp converter in my car by trying to tap it or connect it with a fuse, if that is the cause of sound not working than will build a cable like yours.
Wish someone was selling the modified cable

Here is where I recommend tapping into:



Verify your connections with a voltmeter beforehand just to be safe. These wires will be in the boot/trunk area coming from the factory ampflier

[dane]

thanks Tom, you have been a great help and source of info, will be looking fo rthat wire.

[nicknick1]

Originally Posted by Tom G.

Here is where I recommend tapping into:



Verify your connections with a voltmeter beforehand just to be safe. These wires will be in the boot/trunk area coming from the factory ampflier

Hi Tom:

Do you have a finished picture of the splicing of the wire or just slightly more detail?

Thanks

[Tom G.]

Originally Posted by nicknick1

Hi Tom:

Do you have a finished picture of the splicing of the wire or just slightly more detail?

Thanks

The wire tap simply attaches to the purple wire w/ white stripe, you would crimp it on with a set of pliers.