|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#361
|
|||
|
|||
EDIT: Smaller sky (filesize) did the trick! Check my new cool splash (poor celphone pic) Anyone else with hints on how to get the blue theme map colours to change? Last edited by Emmet; 06-13-2008 at 10:46 AM. |
Sponsored Links | |
|
#362
|
||||
|
||||
Quote:
Quote:
Quote:
Quote:
__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode. |
#363
|
|||
|
|||
Change Text
Can someone help me with changing the Text and voice in NAV OS V31?
|
#364
|
|||
|
|||
Quote:
it's not a joke...but if I did it you can as well... Read carefully and follow instructions...you only have to change pointing language... Good luck Hi all, After some investigation I think I have done it. I will test the new navboot file, but I would like to share with you first what I have done! 1. Downloaded CRC24.exe from the HackTheIbus Yahoo group (first subscribe, etc.): http://autos.groups.yahoo.com/group/...iles/Software/ 2. Downloaded NavTweak from the following thread: http://www.xoutpost.com/navigation-sy...-navtweak.html 3. Extracted NAVBOOT (\V_2\RR\0101\BMWC01S\app_sw\) from the v27.1 image using UltraISO 4. Extracted the Lng_Hollands module from NAVBOOT using NavTweak 5. Opened the Lng_Hollands module with UltraEdit (www.ultraedit.com) and change "Lng_Hollands" to "Lng_Deutsch." with "." being "00" in HEX 6. Saved the Lng_Hollands file, calculated CRC using CRC24.exe and replace the CRC24 HEX values at the end of the Lng_Hollands file with the values from CRC24 - note that CRC24 then says "OK" when you check the file again 7. Replaced the Lng_Deutsch module with the NEW Lng_Hollands module using NavTweak - this now worked (before changing CRC it did NOT work) 8. Replaced the original logo with the BMW logo using NavTweak 9. Saved the new NAVBOOT file ------------------------------------------------------------------------------------------------------------------- So, here is the language change instruction. Lets imagine, that we want to see Italian, when wee choose Deutsch in the settings. So, we need to look for Lng_Italiano and Lng_Deutsch modules. We can get them after decompiling the navboot with split.exe, or directly copy them from navboot with hex-editor (I use WinHex). Open Lng_Italiano and change “Italiano” at address 0000005Ch to “Deutsch”. Change “6F” at address 00000063h to “00”. Look for byte at address 00000027h (basically, we must analyse DWORD at address 00000024h, but it will be less understandable) – it’s “68” here. If value of this byte is greater or equal than the value of this byte in the module, that we change (German), than proceed to the next step. In our case this is so (68>64) and we can proceed (don’t do all, that written in slanting font). But if we want to change Italiano to Deutch, for example, than we need to paste four (68-64) “00” bytes at address 00000064h in Lng_Deutcsh (Ctrl+O in WinHex) and change “64” to “68” at address 00000027h. After that we must change the module leight at address 00000006h from “39 38” (this is module size 14648 bytes, translated to hex) to “39 3C” (this is the new module size 14652 bytes, translated to hex). Now you need to save Lng_Italiano and open crc24.exe. You can get it on HackTheIBus Yahoo Group, I can send it by e-mail, but it will be better to upload it somewhere. Open Lng_Italiano in crc24 and it says Error and write you correct CRC for your new module. Now change last three bytes of the Lng_Italiano from “D7 60 B9” to the CRC, that crc24.exe write you (“1A 22 BC”). Now open original navboot and find Lng_Deutsch in it (it is at address 00B29B30h). Mark all module from the beginning to the end (at address 00B2D467h). You can do it by holding Shift key. Now press Del and delete module. Go to address, where module begins (00B29B30h), copy all your new module and paste it at that address. Save navboot and proceed to “ISO change” routine, that you all know by heart |
#365
|
|||
|
|||
Quote:
|
#366
|
|||
|
|||
Quote:
|
#367
|
|||
|
|||
He could build his own for $10 from the circuit on this board if he wants to. The parts are all at Radio Shack or similar. Good luck.
|
#368
|
|||
|
|||
Quote:
|
#369
|
|||
|
|||
Since i only need to make this change one time, can someone rent me their Resler and i'll ship it back as soon as i'm done?
Also, is it possible to remove the speed limiter via NavCoder? |
#370
|
|||
|
|||
Quote:
So, with Resler you can't remove speed limits... |
Bookmarks |
|
|
|