coding your own nav system without going to the dealer

RolandDV · #1 12-06-2006, 11:38 AM

@Ambishop

The procedure to change the languages in de IKE is in my second post. It can be done with an Ibus interface.

@RichardP1
You can't recode the SES language. All commands are stored in the SES module. According to the parts catalog you have them in English and German versions.

Roland

ambishop · #2 12-06-2006, 11:47 AM

Quote:

Originally Posted by RolandDV

@Ambishop

The procedure to change the languages in de IKE is in my second post. It can be done with an Ibus interface.

@RichardP1
You can't recode the SES language. All commands are stored in the SES module. According to the parts catalog you have them in English and German versions.

Roland

SES module can not be coded, but ULF module contains 7 languages. I will check out the IKE coding. thanks!!!

ambishop · #3 12-06-2006, 11:49 AM

Can you change the IKE language with your tool? It would be really nice to get the full key coding via a software tool

Martin

RolandDV · #4 12-06-2006, 01:21 PM

IKE can only be coded by the HEX string in te second post. The WINBUS apllications is used to send HEX string. The GUI just send the right string for the nav coding.

There are many softwaredevelopers on this board. Maybe some of them can programm a new GUI with a the options (1= nav coding; 2= IKE language coding, ...)

Roland

ambishop · #5 12-06-2006, 02:01 PM

Quote:

Originally Posted by RolandDV

IKE can only be coded by the HEX string in te second post. The WINBUS apllications is used to send HEX string. The GUI just send the right string for the nav coding.

There are many softwaredevelopers on this board. Maybe some of them can programm a new GUI with a the options (1= nav coding; 2= IKE language coding, ...)

Roland

thanks Just to clarify
(1= nav coding; 2= IKE language coding, ...)

Are you referring to the hex sting byte 01 such as shown below

3F 09 3B 07 01 FF 80 81 8300 cs nav coding

3F 09 3B 07 02 FF 80 81 8300 cs IKE coding

RolandDV · #6 12-06-2006, 02:55 PM

Quote:

Originally Posted by ambishop

thanks Just to clarify
(1= nav coding; 2= IKE language coding, ...)

Are you referring to the hex sting byte 01 such as shown below

3F 09 3B 07 01 FF 80 81 8300 cs nav coding

3F 09 3B 07 02 FF 80 81 8300 cs IKE coding

I wasn't referring to the HEX string but just a program with a few menus where you can select what you want to do.

example of Menu
1 = nav coding
2 = IKE coding
3 = ULF coding

behind number 1 is than the GUI like in te application I uploaded etc ..

Roland

appy · #7 12-06-2006, 05:34 PM

Hi,

Roland job is realy graete.
I also use this program and ibus interface and works like hell.

If i sell a MK4 i code the MK4 before i ship him. So everyting is working.

gr. Appy