Hi Jochen !

first of all: thanks for your great work!


BUT: regarding the "TV unlocking" feature:
I found out (after a large series of tests...) that the only way the TV coding works is the following:
1.) set ignition to II (last before engine start, perhaps other positions would also work)
2.) coding TV Tuner with your software
3.) turn ignition totally off (eject car key)
... waiting 10 seconds ...
4.) turn ignition on again (position II)
5.) unplug TV Tuner (blue connector)

If I ONLY turn off the ignition or ONLY unplug the TV Tuner after coding, the coding does not work. (neither enabling nor disabling "TV in motion" funktion).

If I don't unplug the TV Tuner after ignition off->on, a click on "Read TV settings" shows me the correct status I coded, but it does not work like coded.


Does anyone have an idea why I also have to unplug the TV Tuner (so completely disconnect from power)