Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > Electronics > Navigation System
Arnott
User Name
Password
Member List Premier Membership Today's Posts New Posts

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-18-2007, 11:39 AM
trapdoor's Avatar
Member
 
Join Date: Feb 2006
Location: Bristol, UK
Posts: 465
trapdoor is on a distinguished road
Quote:
Originally Posted by Odia The Ultimate
When you install the driver for the IBUS interface it will create a VCP (virtual com port), the virtual device is access via a normal COM. The easy way to find out which COM is the USB VCP is to run NavCoder without the interface connected, note the COM numbers and then run NavCoder again with the interface connected, the new COM number will be the VCP.

Odia.
I have noticed sometimes that Navcoder will not 'find' the VCP even though the USB VCP has loaded and can be seen in Device Manager. Usually closing, unplugging the USB, reconnecting and restarting Navcoder will get it to work, but it CAN be hit'n'miss sometimes.
  #2  
Old 10-19-2007, 10:24 AM
Member
 
Join Date: Feb 2006
Location: UK
Posts: 38
Odia The Ultimate is on a distinguished road
Quote:
Originally Posted by trapdoor
I have noticed sometimes that Navcoder will not 'find' the VCP even though the USB VCP has loaded and can be seen in Device Manager. Usually closing, unplugging the USB, reconnecting and restarting Navcoder will get it to work, but it CAN be hit'n'miss sometimes.
I've not noticed this, maybe you run NavCoder before connecting the IBUS interface? NavCoder does not re-scan the available COMs.

Odia.
  #3  
Old 10-19-2007, 01:23 PM
Member
 
Join Date: Dec 2006
Location: Switzerland
Posts: 2,575
KiwiJochen is on a distinguished road
Quote:
Originally Posted by trapdoor
I have noticed sometimes that Navcoder will not 'find' the VCP even though the USB VCP has loaded and can be seen in Device Manager. Usually closing, unplugging the USB, reconnecting and restarting Navcoder will get it to work, but it CAN be hit'n'miss sometimes.
That's a Windows issue.

When NavCoder starts up, it scans the available COM ports.

If you plug in the USB interface, it takes a few seconds for Windows to make the COM port available.

Start NavCoder too early, and Windows won't have the COM port open yet... so NavCoder won't find it.

Give yourself a few seconds after the USB interface has been connected for Windows to do its thing before you start NavCoder
  #4  
Old 10-19-2007, 01:43 PM
Member
 
Join Date: Dec 2006
Location: Switzerland
Posts: 2,575
KiwiJochen is on a distinguished road
Quote:
Originally Posted by trapdoor
I have noticed sometimes that Navcoder will not 'find' the VCP even though the USB VCP has loaded and can be seen in Device Manager. Usually closing, unplugging the USB, reconnecting and restarting Navcoder will get it to work, but it CAN be hit'n'miss sometimes.
That's a Windows issue.

When NavCoder starts up, it scans the available COM ports.

If you plug in the USB interface, it takes a few seconds for Windows to make the COM port available.

Start NavCoder too early, and Windows won't have the COM port open yet... so NavCoder won't find it.

Give yourself a few seconds after the USB interface has been connected for Windows to do its thing before you start NavCoder
  #5  
Old 10-22-2007, 01:24 PM
Member
 
Join Date: Jul 2007
Location: Holland
Posts: 70
TheM@x is on a distinguished road
New features?

Hi,

can you add the following features?

1. Autofold settings for mirrors
2. Auto on/off settings for lights (also Xenon)
3. Auto settings for lockingsystemen (key-settings)
4. Alarm settings (beeps etc)

Please let me know if these feautures are possible.

Regards,
M@x
Closed Thread

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 12:27 AM.
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.