|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Navcoder Timeout
I've build the simple interface and tried to code my mk4 but it keeps giving a timeout. I tried setting the time-out to higher values (2000) but doesn't help. - I observe a continual stream of Ibus traffic on NavCoder, and can see the commands being sent on the log window. When scanning I most often get only a list of Devices that did not respond.... but sometimes I get a "Device found and are communicating", but it allways tells me that "No ideentification data available for this device" - E46 Touring -04 Mk 4/1-91 - Navcoder 2.0.17 and 2.5.22 (unreg. for the time beeing, but the scan results is the same - and I'll be happy to reg. if I can get it to work). - Ibus, V+, Earth - taken from the CD Changer. - XP pro I've checked my hardware and connections several times. The Log can look like this: 21.09.2008 18:41:14: NavCoder started 21.09.2008 18:43:47: Read TV settings - Error when reading TV settings: Timeout (no response) 21.09.2008 18:44:07: Read Nav Settings - Error when reading current nav settings: Timeout (no response) Any hints would be greatly appriciated !! Regards husvik |
Sponsored Links | |
|
#2
|
|||
|
|||
I kept getting time out messages and changed the Comm.
I registered the product before I used it as I know then I will get support. I connected the Resler IBUS Interface first, then to the laptop Checked the Laptop identified the USB Device and was ready to work Then opened Navcoder. At first I got a timeout message but tried the different port options This may help? |
#3
|
|||
|
|||
Generally timeout means that the data is corrupt due to a poor ground (or the interface isn't working .-)
Post a more complete log of the messages that you see and I can tell you if the data is normal or not Jochen (NavCoder author) |
#4
|
||||
|
||||
Navcoder Timeout - OK
Thank you Jochen !!!
As you suggested, the CD player connection didn't provide a good ground. Changed ground-connection to the chassis of the car, and voilą NavCoder performed like a dream. Tanks for the good support ! Cheers husvik Last edited by husvik; 09-26-2008 at 05:35 AM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|