|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-06-2010, 04:07 AM
|
||||
|
||||
|
No navigation voice
Basically the sound mutes but no voice is heard through the speakers. I plugged the navigation unit straight into the blue cable coming from the car with no 'jump up loom' and it worked, but when i use the loom no sound comes from the unit, just the tv. I have read here that people are having the exact same issue http://www.xoutpost.com/electronics/...v-voice-2.html Can anybody explain how to fix this issue, and what wires i have to change etc, im pretty confused as to what i need to do, does anybody have a diagram or anything. This is the jump up cable that i purchased http://cgi.ebay.com.au/ws/eBayISAPI....#ht_900wt_1139 EDIT: Here are some photos of hows its wired up: ( excuse the poor quality of the photos, taken with phone )   
__________________
2007 E70 X5 3.0D Black/Beige - SOLD 2012 E70 X5 40D Silver/Black Last edited by willy_manily; 07-06-2010 at 08:49 AM. 
|
| Sponsored Links | |
|
|
|
|
#2
07-08-2010, 06:50 AM
|
||||
|
||||
|
anybody know anything about this?
__________________
2007 E70 X5 3.0D Black/Beige - SOLD 2012 E70 X5 40D Silver/Black
|
|
#3
07-08-2010, 06:59 AM
|
||||
|
||||
|
The audio wiring in your adapter harness may not be correct. Try the fixes discussed in these two threads.
#1: MKIV Voice Buzz Issue SOLVED !! #2: Nav Audio - Success
__________________
SOLD 2000 E38 750iL Highline Edition, Upgraded with the lastest 2006 X5 Electronics MKIV Navigation, 16:9 Display, Bluetooth, TV/Video with Backup Camera, Sirius, and Aux Input
|
|
#4
07-09-2010, 11:13 AM
|
||||
|
||||
|
Sounds like the 2 wires that plug into the radio module have not been done.
Check the following: On the blue plug (on the mk4) pin 9 (nav audio out +) and pin18 (nav audio out -), should go to the TV modules white plug on pins 3 (nav audio in +) and pin 12 (nav audio in -). From here they go into the radio module (one of the smaller blocks in the big radio plug). bm54 (flat pin), 12 pin white plug (I think) pin 10 (nav/tv audio right), pin 12 (nav/tv audio letf) and pin 12 (nav/tv audio gnd). Also check the black 12 pin plug pin 5 (nav/tv audio +) and pin 11 (nav/tv audio -) Are you getting sound from the TV?
__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode.
|
|
#5
07-09-2010, 01:01 PM
|
||||
|
||||
|
See this article for the proper connections to the radio module - http://www.xoutpost.com/articles/x5/...formation.html
__________________
 Xoutpost.com - where you come for the information but stay for the friendships
|
|
#6
07-10-2010, 04:46 AM
|
||||
|
||||
|
Quote:
Also how do i know the PIN numbers, do you have any charts or anything. Thanks
__________________
2007 E70 X5 3.0D Black/Beige - SOLD 2012 E70 X5 40D Silver/Black
|
|
#7
07-10-2010, 09:23 PM
|
||||
|
||||
|
Hi there, i found that pin 18 and pin 9 of the blue connector in the back of the MK3 goes to this large white plug which connects into the car, not into the TV tuner, could this be a problem. Im not sure what that large white connector does. But i think this could be the issue
EDIT: Fixed, it was that plug, not sure where it was going but its all good now 
__________________
2007 E70 X5 3.0D Black/Beige - SOLD 2012 E70 X5 40D Silver/Black Last edited by willy_manily; 07-10-2010 at 09:48 PM.
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
