|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
11-03-2010, 09:18 AM
|
|||
|
|||
|
I think the pinout of the blue plug will be the same carrying power, tape audio, iBus and illum - obviously check on the wiring diargm. Than you have an RGB cable, it would go into the white connector of the 16:9 and into the unoccupied pins on the nav blue connector.
Any old RGB cable will do, as you will be cutting the connectors off. It will be 75Ohms (50R audio cable won't do) and try to get a reasonable quality cable with double screening although don't lose too much sleep over it. Get the connectors first, as they could be a PITA to find, especially the keyed white lever lousing. You may need a generic unkeyed version. 
|
|
#2
11-03-2010, 11:00 AM
|
|||
|
|||
|
Makes perfect sense now thanks. Might work on the cable as a side project and swap over eventually. If I leave all the current kit and cabling in place it should be easy to swap over at a later date if I switch to Business CD first and save some pennies.
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Hybrid Mode
