|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Quote:
Before you start you will want to make the following disks - KeyCD, V18.2, and V22. You can download them at http://bmwnavigation.com/software/Na...tware_Updates/ and use CloneCD (download at http://slysoft.com). There are tips on how to make the CD at http://www.bimmernav.com/software.htm. Once you have the disks ready then you will follow these steps: 1. Go to your vehicle and turn the ignition switch to the first position. Let the navigation system boot up and get into a normal operating mode. 2. Leaving the system on (never turn the power off during these steps!!), go back and eject the navigation CD from your drive unit. 3. Put in the V18.2 disk into your drive unit. Watch your screen and be patient. It will take about 6 minutes to do the upgrade. When it’s done it will eject the CD automatically and should ask you for the KeyCD. 4. Put in the KeyCD and let the upgrade complete. 5. Put your navigation CD back in the drive and make sure everything is working properly. 6. Eject the navigation CD and put in the V22 disk into your drive unit. Watch your screen and be patient. It will take about 6 minutes to do the upgrade. When it’s done it will eject the CD automatically. 7. Put your navigation CD back in the drive and make sure everything is working properly. 8. Check your settings and you should now be on 3-1/63. Note that once you go to a splitscreen OS you will no longer have the on board computer (OBC) information displayed below the radio station information when you are on that screen. The OBC information is on a separate screen now, which you can get to by hitting the "MENU" button.
__________________
![]() Xoutpost.com - where you come for the information but stay for the friendships |
|
#2
|
|||
|
|||
|
o yeh this seems easi but im scared i mite mess it up. Will i need a separate disk for each keyCD, v18.2 and v22?
can u pls tell me ALL the things i have to pay UTMOST attention to while upgrading?...because i do not want to "fry" it! lolzz nd ano4 ting if i took it 2 the dealer wud it and how much will it cost if i asked them to do it? (nd the labour charge needed). thanks a lot arya Last edited by balla; 01-02-2006 at 10:32 AM. |
|
#3
|
||||
|
||||
|
Quote:
Best tip I can offer is to carefully read and follow all of the steps that I wrote above and those that I linked to. And don't try to take any shortcuts. Take your time and it should be fine. You could try going to the dealer, but most have never done this and will give you the "deer in the headlights" look when you ask them. Also, most will not have the KeyCD handy. It may be worth asking, though. Some may charge you an hour or two in labor (even though it's a 15 minute job), while others will do it free of charge. It all depends on the dealer.
__________________
![]() Xoutpost.com - where you come for the information but stay for the friendships |
|
#4
|
|||
|
|||
|
lolzz
ere in de UK dey'll probz charge 10 times as much!!!
ill c wot happens have u got MSN or yahoo? Last edited by balla; 01-02-2006 at 11:06 AM. |
![]() |
| Bookmarks |
|
|
|
|