|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
09-25-2011, 02:56 PM
|
|||
|
|||
|
Backup camera pulsates - Help
I just installed Navtool and Boyo backup camera in my '05 X5 with factory Nav. Everything works fine with ignition on (camera kicks on when I shift into reverse) but when I start the engine and shift into reverse the camera stays on for a second or two then switches back and forth to the nav screen... I can't seem to figure out what is different with the ignition on vs. turning the engine on... I installed relay as follows:
85= ground 86= reverse light trigger wire 87= Navtool video module trigger 30= switched power Any help much appreciated... Rob 
|
|
#2
09-26-2011, 05:02 PM
|
|||
|
|||
|
fyi.. my maddening ordeal is over... After much searching and confirming the wiring diagram I was working from was correct I started from scratch and rewired everything back up... all is working fine now... apparently user error missed or crossed a wire to the relay...
|
|
| Bookmarks |
| Tags |
| backup, backup camera, camera, relay wiring |
|
|
|
|
Hybrid Mode
