|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Moving LUMBAR location for taller drivers
Note: these instructions are for Standard or Sport seats, they may be different for Comfort seats! 1. Remove 2 plastic plugs from bottom of seat back (a trim removed tool and some time of wedge is usefull as these plugs are much longer than necessary) 2. Pull seat back down 2 inches, then pull back for removal 3. Depress 4 flaps from top of lumbar pad for removal from the horizonatal wire (gloves are good as the metal edges are sharp) 4. Pull lumbar pad up 1 inch and resecure 4 flaps over new horizontal wire 5. Reinstall seat back and slide up (make sure 2 plastic tabs slide into seat leather on both sides) 6. Press plastic plugs back into place (new ones would be nice and they are only $0.26 for 52-20-1-964-201??) Enjoy using both air bladders! Thank you Bimmerboard for hosting the pics... |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|