Xoutpost.com - Pioneer AVIC Z1...installed

Xoutpost.com (https://xoutpost.com/forums.php)

- Mobile Electronics Forum (https://xoutpost.com/electronics/mobile-electronics-forum/)

- - Pioneer AVIC Z1...installed (https://xoutpost.com/electronics/mobile-electronics-forum/22332-pioneer-avic-z1-installed.html)

Re: Pioneer AVIC Z1...installed

Just installed a pioneer avic Z110bt

Quote:

Originally Posted by kevinflynn (Post 718070)

Nice Work NextGen. I noticed that comparing these two pictures it looks like you also cut out another horizontal piece at the top of the enclosure in addition to the middle horizontal plastic piece. Is that true or just a photo illusion? I am about to cut that piece out to get my radio to sit higher.

top horizontal bar with slot in it..
http://www.xoutpost.com/attachments/...1installed.jpg

and
looks like piece cut out so radio sits higher.
http://www.xoutpost.com/attachments/...sinstalled.jpg

Thanks

No, I made no additional cuts. When connected to the brackets the radio is positioned a little higher from a Z direction perspective (no pun intended). This is a nice effect because the radio will sit too deep without them.

Quote:

Originally Posted by Triple X5 (Post 722393)

Just installed a pioneer avic Z110bt

Please start a new thread and :worthless:

Re: Pioneer AVIC Z1...installed

Quote:

Originally Posted by Triple X5

Just installed a pioneer avic Z110bt

Sent from my iPhone using Tapatalk