Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Mobile Electronics Forum (https://xoutpost.com/electronics/mobile-electronics-forum/)
-   -   Connect a car PC to factory Navigation (https://xoutpost.com/electronics/mobile-electronics-forum/45587-connect-car-pc-factory-navigation.html)

rp-x5 04-06-2008 01:53 AM

Connect a car PC to factory Navigation
 
Hello X5world memebers. I am trying to find the best solution to connect a car pc to the factory 16:9 screen to run Carx or centrafuse. I understand that the video modules carried by EAS and the factory TV module both accept composite signal which can be sent from the car pc. but I am afraid that the picture quality won't be any good for windows desktop. also there might be underscan problem which leaves blackbar around the picture.
so is there any plug and play VGA to factory navigation module solution available? I saw that car-deck/ Carmes's BMW Car Interface Box CIB has all the ports are needed to connect VGA to factory module. anyone has experience? What about the GNET module from Canada? It has RGB in port, could it be connected to VGA with a simple cable?
Thanks for the help , guys.

E5M1R 04-06-2008 06:43 AM

Did you read carx how to ?
as far as i know it connects trough RGB and video is shown where Tape is, and i bus interface will let you use stereo knobs to control the menus

rp-x5 04-06-2008 02:56 PM

Quote:

Originally Posted by E5M1R
Did you read carx how to ?
as far as i know it connects trough RGB and video is shown where Tape is, and i bus interface will let you use stereo knobs to control the menus

Yes. but exactly how do you get RGB wires from the factory system? I really don't want to cut the factory harness. I am looking for a plug and play solution. anyway, I just ordered a Gnet module, its plug and play and features a RGB input port. I am going to test it out with a Matrox G200 PCI card which can output RGsB. Ibus interface is on the way from Germany as well.

ralphy4321 04-08-2008 06:31 PM

Let me know if you get this done and price, i am interested too
 
Quote:

Originally Posted by rp-x5
Yes. but exactly how do you get RGB wires from the factory system? I really don't want to cut the factory harness. I am looking for a plug and play solution. anyway, I just ordered a Gnet module, its plug and play and features a RGB input port. I am going to test it out with a Matrox G200 PCI card which can output RGsB. Ibus interface is on the way from Germany as well.


Let me know if you get this done and price, i am interested too

gwc 04-08-2008 07:19 PM

http://www.trust.com/products/produc...spx?item=14135

Seems favoured by carx.

rp-x5 04-08-2008 07:48 PM

Quote:

Originally Posted by ralphy4321
Let me know if you get this done and price, i am interested too

sure. the GNET module arrived today from Canada. and my car will be delivered tomorrow morning. what a perfect timing! Definitely will post the progress on this.

rp-x5 04-08-2008 07:53 PM

Quote:

Originally Posted by gwc

The problem with those kind of converters is that on the factory navigation side you always get RCA type composite. which might not be as good as a RGB connection. I will test both out and let you know. I also have a latop with S-video out. a simple S-video to RCA would do the trick.


All times are GMT -4. The time now is 12:59 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.