You may be right. The TV-in-Motion works on a number of analogue-only tuners. Only through experience and feedback such as yours will we be able to collate the information about which modules work and which don't.

Do you mean just for the TV tuner? Or for every ibus device in your vehicle?
The HW and SW revisions are programmed inside the memory of the device, my software just reads the memory. I don't change these values at all,

Jochen

I think it's for all the devices, which is why I thought it might be a bug in the display, not what you read. I'll check again by doing a complete scan.

KiwiJochen thank you very much for your great job.

In my car with hybrid tuner TV in motion works.
TV Video module:
Part number 6 968 041, version HW 04, SW 04, made by Loewe on 35/05 (August 2005)

A short time i had the same problem (TV in Motion did not work) because i coded TV while TV on and had forgotten to totally switch off the ignition before driving. The next day i probed again it worked perfect!



Thanks again!!!

Can anyone tell Brian and I the P/N of the male plug used in the CD unit so an adapter cable can be made?

I think it might be 61 13 8 377 072 but I'm not 100% certain.

If you go to an electronics store you'll find standard PCB edge connectors have the same pins and pin spacing. They fit!

I've just re-tested it after having cycled the ignition and now it works! Great stuff!! :thumbup:

v2.0.17 now released. See http://www.xoutpost.com/navigation-sy...-released.html