Yes. You need to supply +12 volts and ground.

Thanks for the info! :thumbup:

Hi Tweaterwes,

the only way to change the language is to select "Code Language".

So you can code your TV with no impact on language whatsoever.

But you can help me too - i want to know what the numeric language code for NL is - please can you use NavCoder, select "Read Language" and then send me the ibus messages that appear in the main NavCoder window.

I can then see what numeric language code represents NL, and add it in to NavCoder.

Jochen

It is the left side connector. It has three pins, 1 is Ground, 2 is 12V and 3 is I-Bus. Pin 1 is the righmost pin in this picture.
The three pin connector that fits into this three pin socket in the CD changer should be disconnected from the CD changer and connected to the I-Bus interface device.
Attachment 14778

@kiwijochen:

Is this the ibus code that you wanted:
00 00 89 81 86 00 89 81 86

I still have a 'runtime error 380 : void property value' on vista. :stickpoke

Perfect, Dutch is language number 9 !!

Thanks

Well as you think KiwiJochen we shall solve a problem with a unblocking tv on hybrid modules of 2007-06 of release?

NavCoder works with hybrid modules in ibus cars (E38,E39,E46,X5,X3 etc)

I do not have a MOST-based vehicle so have no ability to work on them

I have understood that it is a question about i-bus modules, but I tried to do a unblocking on the module of 2006-7 of release, the TV in movement does not work!