I have Tire Pressure Control (RDC) with wheel sensors. I have just upgraded from 16in wheels to 18in M double-spoked wheels. I have relocated the sensors to the new wheels but the system is bothering me ever since. It keeps saying "Tire control inactive!". I have tried activating the system numerous times, exactly as it says in the manual but no success.
The "stealer" said the wheel sensors may be old and may need replacement but I doubt that, they were working perfectly with my other wheels.
Until I find a solution to this problem I would like to disable the system completely.
(sorry for the off-topic)

One more question: for example, there is one navi unit MK3 (i think in MK4 is the same). As a default it has Fr and Eng languages.... I'm making the customisation by changing this set of languages to Us and Ger..... and then next time when new navi SW would be released (or updating from 3-1/62 to 3-1/63) this custom set of langueages will stay or I should again fix this by NavCoder (or other soft)?

Not sure about the MK3, but I would assume it's the same as the MK4, anyway, the languages on the MK4 stay as you have set them, I have UK (F) US (F) and GER (F), and they have been like that since v28.

HTH

Thank's for the answer! ;-)

So you've changed it once and since then it stay the same after next updates, correct?

I changed it to Eng, Ger, Dutch (I think I had that time v29) and I had no problems after update to v31. :2thumbs:

Correct :thumbup:

kooi72 & ccfj1 - Thank you guys!!! ;-)

Where can i buy the NavCoder software ? How much will it cost ?
What hardware do i need to use with Navcoder ? (serviceplug ?)

Are there any screenshots of the program somewhere.

I would like to buy it for changing the language of the NAV system.

I suppose this software can do that :bustingup

Welcome to the forum,

Download the zip file and read the read me.

20 Euros (I think)

You need an I-bus interface, there is a simple circuit layout in the zip file , it costs pennies to make, or buy one from restler (approx 40 euros, do a google search).
Download and try it, it's very easy to use.

Yes, it does.

I would say like this:

You can dowload unregistered version of NavCoder free of charge from here http://www.xoutpost.com/477895-post1.html . Unregistered version works but some functions are disabled. To register NavCoder (to enable this functions) you should pay 20Euro (detailed procedure is in Help file of the program)

Regarding hardware - ccfj1 gave alredy the answer

Good luck!