Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   Charging the v26 software.... PROBLEM (https://xoutpost.com/electronics/navigation-system/5289-charging-v26-software-problem.html)

mr.jerry 09-19-2005 04:56 PM

Charging the v26 software.... PROBLEM
 
I have downloaded the v26 software and i have burt it with Alchool.

I've inserted into my MK4 and i had the 1st screen saying that the charging software would have begun.

than i had a black screen for half an hour, so i decided to turn off the car.

than i've tried to re-charge the software ejectign and re-inserting the cd.
no chance more....

i thought that maybe the CD was bad so i left the old cd into the nav cd reader i come bak home, i burt another copy of the software.

but when i tried again to eject the cd from the nav cd reader nothing.
the system doenn't eject the cd.

i tried to disconnect the + connector on the battery for some second, but nothing.

can anyone help me.

sorry for my english

phil47 09-19-2005 05:16 PM

Try the tips in this link:

http://www.xoutpost.com/showthread.php?t=4655

mr.jerry 09-19-2005 05:37 PM

Thanks toy for the support
but i've just solved the problem! :thumbup:

at last after 1.000 try it has ejected the CD. :woot:

than i've burnt a new CD (on a TDK disk this time) and in 3 minutes
my MK4 was updated! :smokin:

VERY nice graphic! now i have only to test. but now here in Italy
is 23:53... and tomorrow i have to work.
i'll try it tomorrow going to work :driver:

thanks for helping me and the quality of virgin CD does matter! :goodluck:

JV 09-19-2005 05:38 PM

Quote:

Originally Posted by phil47

If that doesn't work, I will tell you how to manually wind out the CD.

JV

Alfredo 01-29-2006 01:17 PM

Please could you send me the information for manualy eject the cd
Thanks

JV 01-29-2006 01:55 PM

Alfredo,

You have to remove the Nav drive from the rear compartment, remove the top cover, then move the motor out of the way before you can manually wind the CD out. You should be comfortable with doing this before I give you any more guidance on it and you should be prepared to solder the motor back into its connector, because it can easily break loose.

JV

UCrewX5 01-29-2006 02:03 PM

Before opening the unit up I would suggest removing power from the unit and then simulataneously hold down the disk eject button while reapplying power.

Alfredo 01-29-2006 02:16 PM

The cd is out now, but the nav item does not appear on display.
The problem has taken place when I try theRestoring Splitscreen Radio Mode with Nav OS Upgrade
Maybe after the error is necesary to recode something?
I have disconect the batery for two minutes but it follows without appearing.
Some advice?
Thanks for your help

UCrewX5 01-29-2006 02:26 PM

Quote:

Originally Posted by Alfredo
The cd is out now, but the nav item does not appear on display.
The problem has taken place when I try theRestoring Splitscreen Radio Mode with Nav OS Upgrade
Maybe after the error is necesary to recode something?
I have disconect the batery for two minutes but it follows without appearing.
Some advice?
Thanks for your help

Is it a MkIII or a MkIV? The MkIII is vrey fussy and once corrupted is close to impossible to bring back to life. The MkIV is much more forgiving and generally putting in a good OS disk will restore it properly.

:goodluck:

Alfredo 01-29-2006 02:30 PM

Its a MKIII


All times are GMT -4. The time now is 02:34 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.