Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   installing mk 3 into existing system (https://xoutpost.com/electronics/navigation-system/59138-installing-mk-3-into-existing-system.html)

kally 03-13-2009 08:39 PM

installing mk 3 into existing system
 
Hi all Gotta a great site been checking it out full of great info, need help though.

Have a 2001 delivered 4.4 black with beige interior (2000/10 manufacture date) with 4;3 screen tv tuner, 6 cd shuffle.

want to install 16;9 monitor (purchased) mk 3 (purchased)

where do i plug it into? does it use existing plugs from new loom ? is there any reprogramming required ?

I ask this as i thought it was a matter of upgrade screen(seen info on site very informative) but then cant find info for connecting mk3 to sat antenna (i know to put it under rear spoiler) and connecting to screen (bought wiring loom from bm 800 mm long so i assume it runs to something in close proximatey)

if you guys could help i would be very happy:rofl: !!!!!!!

thanks everyone what a great site you have here !!!!!!!

UCrewX5 03-13-2009 09:11 PM

I am assuming that the vehicle came with the TV option but not the sat nav. Check and see if there are a blue and purple connector in the left rear electronics bay area. That is where the nav drive would be mounted and connected (and where the antenna will plug into the nav drive unit)

kally 03-13-2009 09:26 PM

thanks mate ill check it out the misses has grabbed the car to do some stuff when seh gets back ill check it out and respond thanks buddy !!

kally 03-13-2009 09:27 PM

yep as far as im aware thats right came with tv tuner but no sat nav !!

kally 03-13-2009 11:30 PM

found a blue but not a purple i took out the cd player to have a good look anyone have any picture of what it should look like ?

kally 03-14-2009 12:21 AM

i purchased the bmw wiring loom for sat nav it has a blue and purple connection one end the a white connection a black connection and 2 other smaller black connection i dont know were these go the 2 small black connections.

KiwiJochen 03-14-2009 08:01 AM

Quote:

Originally Posted by kally
i purchased the bmw wiring loom for sat nav it has a blue and purple connection one end the a white connection a black connection and 2 other smaller black connection i dont know were these go the 2 small black connections.

That's the main loom you need

The sat nav unit is mounted in the boot - you may need the mounting bracket.

The wiring loom goes between nav computer (blue/purple plugs) and video module (white plug) and the loom connection for power (black connector)

Video module is in the spare wheel well.

PM me you email address and I'll send you all the instructions you need. Retrofitting the Mk3 nav is really easy in your car.


All times are GMT -4. The time now is 01:09 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.