Nav connector
 

Hi,

Does anyone know the signifiance of every pin on the blue connector that goes from the navi unit to the dispay?

I plan in adding a Composite video to RGB sync on Green Convertor in order to be able to input differet video signals on the display. I found a good converter for 60% of the normal price of a video interface.

I think the pinout is the same as that of the TV-tuner but i want to be sure.

Thanks in advance!

Yes, essentially the same, but remember the nav uses 50-ohm output for the long cable to the screen, whereas uses 75-ohm output for the short cable to the video module.

Hence the video sitting on different pin numbers

I plan to interrupt the video signal from navi to display and interconect my RGB converter there. Normaly the signal will bypass the converter but at the touch of a button it will switch to tv-tuner , dvd or camera. So i still need the exact pins on the navi conector.www.autoimprove.ro