|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-22-2009, 12:54 PM
|
|||
|
|||
|
Nav connector
Does anyone know the signifiance of every pin on the blue connector that goes from the navi unit to the dispay? I plan in adding a Composite video to RGB sync on Green Convertor in order to be able to input differet video signals on the display. I found a good converter for 60% of the normal price of a video interface. I think the pinout is the same as that of the TV-tuner but i want to be sure. Thanks in advance! 
|
| Sponsored Links | |
|
|
|
|
#2
03-22-2009, 04:14 PM
|
|||
|
|||
|
Yes, essentially the same, but remember the nav uses 50-ohm output for the long cable to the screen, whereas uses 75-ohm output for the short cable to the video module.
Hence the video sitting on different pin numbers
|
|
#3
03-22-2009, 04:29 PM
|
|||
|
|||
|
I plan to interrupt the video signal from navi to display and interconect my RGB converter there. Normaly the signal will bypass the converter but at the touch of a button it will switch to tv-tuner , dvd or camera. So i still need the exact pins on the navi conector.www.autoimprove.ro
Last edited by baracuda; 09-28-2014 at 05:31 AM.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
