Sorry about that, deleted from post.

Ahh I see, so the only way to be able to test it is to go by a speed camera.

So there shouldn't be anything to select in the menu or anything like that it should just automatically work ?

For the CD what I did was I placed it in the drive. Went to ultra iso and made an image of the cd. Then I opened the image, took 2 files called carindb and bibliogr and placed them into a folder on my desktop. Then I used poison, selected thefolder, added the tomtom pois,selected a new output folder, clicked copy original files, then save changes. I then took the new carindb file and replaced it into the CDimage and saved changes. Then I merely burnt on lowest speed using imgburn.

Does that procedure sound correct?

thanks
Correct.
Yes, they auto select and just work.

That sounds perfect.

All working now :D:D

Did spot a glitch though ! I have a dice unit installed for the ipod. If you turn the speed camera warnung off then when you approach it still stutters/pauses the music for a milisecond but doesn't say anything !

Nice :)

You might want to have a look at the Intravee II, its almost OEM in operation, and IMHO it is much better than the dice.

This is due to the fact that the OS has been hacked to do the alert and the OFF is the same as the on, except for the actual alert wav, so "on" plays the wav, "off" plays the empty tag holder (nothing), so turn the nav volume (in the set menu) to about half way and it will minimise the pause.

Warning

That firmware that was from m3cutts that khizman accidentally posted as a glitch !

Lets say you have the speed cameras ON, the language is in English and all is good.

As soon as you turn the cameras off it goes into French ! As soon as you change the language back to Englisht the cameras go back ON.!

Options are - cameras on constantly or cameras off and put up with french lingo.

People who run an E39 will see this annoying due to the OBC and the Traffic programme being all in French :(

This has kinda screwed me over as I'm not sure if there is a fix for this glitch, if there isn't I dunno how to get back to stock V32 either :(

Any help anyone?

To reload standard V32, simply insert the disc and let the update take place.

If you made the mistake of previously modifying V32 WITHOUT changing the version nuber (tut tut) then you'll have to load a different version software first

Why?
Nav looks at the version number of the new OS disc.
If version number is same as what is already loaded, nothing happens

that's why when you modify any OS disc, you should always change the version number so you can easily reload V32 if needed.

This is not a glitch, and had you bothered to READ the thread then you would have noted that this is explained in full.

This is one of the reasons that I did not post that link here, it has caveats, you should have read them and understood them before you blindly installed the software.

In summery;
This is the way that it works, the "off" options should only be used as a temporary measure the DEFAULT is "on", because the "off" is a modded version of the FRE language set (Text and Voice), these (for the nav computer) have been converted to English and work perfectly, the "glitch" is that the TV, phone and some other modules these have there own language sets loaded (and these can't be changed).

If you want it to work fully (with all the other stuff in English) then there is a fix, go back and read the thread it has all the info you need to do it, you need navcoder, an i-bus interface and a OEM v32 OS disc.

Yes there is a fix.

Download a normal v32 (from this site) and install it, like Jochen says, dead simple mate, all problems solved.