just to get you right this is steps that you take in the intravee menu ?

i dont get the last instruction ?

I'm not fully clued up on it mate, but you need to assign a button on the display and then you can use it to pair.

OK, been out to mine

Go to main menu, then press setup, then setup keys, then display LKP, then select the phone button and scroll to the BT pair button and select. then go back to the main menu.

Then LKP (long key press) the phone button (ignition stage 1, radio circuit) and then away you go mate,

BTW the phone needs to be available in the main menu....

cheers

lets give it ago....drop a line soon ..

ok, yesterday evening i got to work,

opened the center consol and took out the mini white plug. put it all back together.
went through the intravee menu as to your instruction

Set the LKP button to the phone button which is on the right to the screen....

and switch car off and pressed the phone button for 3 sec and then switch to position 1 etc....

got no joy ?

Actually , when i unplugged the white plug , the phone menu did not come back on ?


any hope here ?

Reboot (unplug wait 10secs then repulg) the ULF and hope for the best mate.

Once the IV's phone button is setup, just press it mate, no need for the press, wait 3 secs, release, palaver.

are we talking about the the white plug in center console as mentioned previously ?

As said b4 the telephone connection still did not come up ?

No mate, the big 54pin connector block the plugs the ULF to the cars wireing.

It's in the boot mate.

ULF is on the left front, plug is on the right, (what he's pointing at).

http://www.bimmernav.com/images/x5bt24.jpg

thanks , lets give that a go ....

ok

i went and disconnected the ulf / actually put another one in / same as the one in my x5, which is a generation 4 .

selected the blue tooth pairing button to the phone button on the screen module / dashboard....

switch car off and started again, and no joy ?

do you think its the generation 4 ulf ?

incidently my telephone option is back on the screen, yet when i press it , gives no options etc...

funny, when going into the telephone option its in french , whislt all other options etc are in english....

OK.

Confirm that the IV has the pair option assigned to it (just to be sure).

Hmm...

Could be.

Except "activate phone"??

Do you have the modded POISon v32 loaded? if so turn the alert back on. (so it goes to english).