Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   Navigation retrofit in 2001 E39 (https://xoutpost.com/electronics/navigation-system/73716-navigation-retrofit-2001-e39.html)

willy_manily 06-16-2010 02:19 AM

Navigation retrofit in 2001 E39
 
E39 2001 525i

Background:
Car has TV
Widescreen Front Monitor
CD Changer

The car has no Navigation, it came stock from the factory like this and it seems to be fairly common on the Australian delivered 525i's

What i want to do is purchase a MK3 drive and either replace the existing analogue tv or somehow get both working at the same time

What do i need and how much is it all going to cost, what are the steps involved?

I head that there was some loom you could get that would basically link the tv to the navigation but the computer would still recognise it as two devices so i can have tv and navigation running at the same time.

Any help would be fantastic

AlanD 06-16-2010 03:16 AM

hey, I'm in exactly the same situation as you.
check out this thread for more details

http://www.xoutpost.com/electronics/...fit-query.html

there are some part numbers there for the retrofit loom you need

if your car has the monitor you will at least have the white six pin sitting on the top left corner of the wheel arch. if you are lucky it will also have the black six pin which connects to the speed sensor and reverse light for a fully plug & play solution.

if you dont have the black 6 pin (like me) you will need to tap 2 wires

i will be hoping to complete mine over the weekend and will let you know the outcome

willy_manily 06-16-2010 05:26 AM

Quote:

Originally Posted by AlanD (Post 749178)
hey, I'm in exactly the same situation as you.
check out this thread for more details

http://www.xoutpost.com/electronics/...fit-query.html

there are some part numbers there for the retrofit loom you need

if your car has the monitor you will at least have the white six pin sitting on the top left corner of the wheel arch. if you are lucky it will also have the black six pin which connects to the speed sensor and reverse light for a fully plug & play solution.

if you dont have the black 6 pin (like me) you will need to tap 2 wires

i will be hoping to complete mine over the weekend and will let you know the outcome

Ok well i just checked and yes i have the white 6 PIN, what exactly does that do?

Also what loom do i need?

Id love to see pics of it completed when its done, and what two wires you tapped into.

Heres some pics of what i have in my boot.

http://i29.photobucket.com/albums/c2...3/IMG_6496.jpg
http://i29.photobucket.com/albums/c2...3/IMG_6495.jpg
http://i29.photobucket.com/albums/c2...3/IMG_6494.jpg
http://i29.photobucket.com/albums/c2...3/IMG_6493.jpg
http://i29.photobucket.com/albums/c2...3/IMG_6492.jpg

AlanD 06-16-2010 05:33 AM

i cant see your picture, but i assume you have the white, but not the black?

whether you have it or not, 61128384473 or 61126915132 is the cable you need. (1 supports Mk3/4 and the other supports all versions)
try ebay, there are also a few online shops that sell them

this cable will allow you run both tv and nav

willy_manily 06-16-2010 05:37 AM

I just revised my post and updated the photos, check it :)

Cheers

AlanD 06-16-2010 05:43 AM

Quote:

Originally Posted by willy_manily (Post 749189)
Ok well i just checked and yes i have the white 6 PIN, what exactly does that do?

best i can understand is that it provides power to the gps, along with muting the radio when directions are read out

Quote:

Originally Posted by willy_manily (Post 749189)
Also what loom do i need?

61128384473 or 61126915132 should be what you need

Quote:

Originally Posted by willy_manily (Post 749189)
Id love to see pics of it completed when its done, and what two wires you tapped into.

if i get it done, ill certainly post a few pics for you

Quote:

Originally Posted by willy_manily (Post 749189)
Heres some pics of what i have in my boot.

looks like lots of aftermarket equipment in there, i'm not a pro but i imagine that might cause issues with getting the sound/muting to work

willy_manily 06-16-2010 05:47 AM

Quote:

Originally Posted by AlanD (Post 749193)
best i can understand is that it provides power to the gps, along with muting the radio when directions are read out


61128384473 or 61126915132 should be what you need


if i get it done, ill certainly post a few pics for you



looks like lots of aftermarket equipment in there, i'm not a pro but i imagine that might cause issues with getting the sound/muting to work

In regards to the loom, which one would i need, they are both a different part number which means they have something different about them, and i can't figure out what it is.

So basically all i do is purchase the following
1. MK3 computer
2. 61126915132 wiring loom
3. some electrical wire for tapping
4. gps antenna

+ some brackets for mounting the navigation drive and we should be set to go?

In regards to the aftermarket locs, these basically just send the audio signals through two aftermarket amplifiers then back into the speakers so it shouldn't be an issue.

AlanD 06-16-2010 05:52 AM

61128384473 - also has an extra connection for the trimble unit that is required for mk 1/2 nav units. it is wired so that it also supports mk 3/4
61126915132 - does not have wiring for the trimble unit so is only capable of supporting mk 3/4 units

either harness will do, you should find one on ebay or order through a dealer.

you will also need the following bits and pieces

GPS Antenna 65 90 8 375 944------------\
GPS Antenna Mount 65 90 8 360 725 ------> these 3 can usually be ordered as one on ebay, either as BMW or aftermarket
GPS Cable 61 12 8 377 434---------------/

Computer Bracket 65 90 8 361 459
Boot/trunk Panel Cover 51 47 8 190 763

willy_manily 06-16-2010 05:57 AM

Quote:

Originally Posted by AlanD (Post 749195)
61128384473 - also has an extra connection for the trimble unit that is required for mk 1/2 nav units. it is wired so that it also supports mk 3/4
61126915132 - does not have wiring for the trimble unit so is only capable of supporting mk 3/4 units

either harness will do, you should find one on ebay or order through a dealer.

you will also need the following bits and pieces

GPS Antenna 65 90 8 375 944------------\
GPS Antenna Mount 65 90 8 360 725 ------> these 3 can usually be ordered as one on ebay, either as BMW or aftermarket
GPS Cable 61 12 8 377 434---------------/

Computer Bracket 65 90 8 361 459
Boot/trunk Panel Cover 51 47 8 190 763


Ok cheers, yep ill just be using an aftermarket antenna, ill mount it in the rear pillar with some double sided stickytape.

also will this antenna work External 5.5mm SMA Magnetic GPS Receiver Antenna 3M New - eBay, Antennas, GPS Accessories, Electronics. (end time 13-Jul-10 19:54:39 AEST)



EDIT: i ended up purchasing this loom which is the one that won't work with older units such as MK1 and MK2 which doesn't fuss me

BMW E39 Kabelsatz Verbindungsleitung Navigatrion MK 3 - eBay Kabelbäume, Autoelektrik, Auto-Ersatz- -Reparaturteile, Auto Motorrad Teile. (end time 02-Jul-10 20:09:25 AEST)


Then purchased my navigation drive, and antenna

KiwiJochen 06-16-2010 05:34 PM

Quote:

Originally Posted by willy_manily (Post 749196)
Ok cheers, yep ill just be using an aftermarket antenna, ill mount it in the rear pillar with some double sided stickytape.

Won't work there.

It needsto be mounted on the parcel tray, flat, with clear view of the sky

The original antenna position is at the rear of the parcel tray under the parcel tray lining. Lots of room for a magnetic antenna there.


All times are GMT -4. The time now is 03:31 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.