|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Quote:
|
|
#2
|
||||
|
||||
|
So would you just bring your knives to one of those guys that:
"Makes keys AND sharpens knives"... ??? How often to re-sharpen?
__________________
---------------------------------------------------------- "When two people agree on everything, one of them is not necessary" - Arliss |
|
#3
|
||||
|
||||
|
When I had my restaurants in NYC, I had a sharpener who came to my restaurants to sharpen all our knives.......
|
|
#4
|
|||
|
|||
|
B-Line -
Is your location still correct. LA ? I know a couple of guys out there who can put a scary sharp edge for you when it needs some TLC |
|
#5
|
||||
|
||||
|
Quote:
Are the people you know knife sharpeners? Or just friends who will give me an edge? Either way, thanks for the offer. And how often should they be sharpened? Check with trying to slice a piece of paper?
__________________
---------------------------------------------------------- "When two people agree on everything, one of them is not necessary" - Arliss |
|
#6
|
||||
|
||||
|
Quote:
Knives need 2 types of sharpening. Initial Honing Maintaining the honed edge with a steel Honing removes metal and reduces the size of the "teeth" and gets them into alignment. Knives do not need a burr. Burrs are bad. It is an excess of metal on one side of the edge. Feels sharp to the finger, but Performs no useful function. A knifes's edge is just a refined saw blade. Small teeth (honing) and aligned (steel). The smaller and straighter the teeth, the sharper the edge. Too fine and edge dulls quickly. A steel is used daily to just keep the teeth aligned. One or two brushes ONLY before each use. Do not stand there like some guys on tv just swiping for minutes. An old trick is to hold the steel point down onto the cutting board. Place the top, rear of the blade against the steel's guard and rest the heel on the blade on the steel. It should be between 22-25 degress naturally (on an 8-10" chef's knife). Simply swipe the blade downwards one to two times per side. As ar as frequency??? Hone when it is no longer sharpened by a steel. Some knives of mine can go a year in a pro kitchen, some I would hone every 4-5 months. It depends on how well you use your steel. You can hone them as often at you like, you just wear away the blade.
__________________
![]() 2001 e53 4.4i Sport, Nieman Marcus Edition. Stealth One. 2013 e70 3.5d Stacked, Custom |
|
#7
|
||||
|
||||
|
AL CLAD.....Copper core....
|
|
#8
|
|||
|
|||
|
More fashion than function on the copper core AC.
|
|
#9
|
||||
|
||||
|
As one member noted, heavily used All Clad tends to warp and the layers will delaminate.
__________________
![]() 2001 e53 4.4i Sport, Nieman Marcus Edition. Stealth One. 2013 e70 3.5d Stacked, Custom |
|
#10
|
|||
|
|||
|
Use good cutting boards. Wood or Composite Plastic -- I prefer wood. Bamboo is too hard on knives.
Steel in between sharpening to keep the edge. Use a tomatoe or potatoe and you can feel when it's not sharp anymore..... I tend to get OCD with my hobbies. Did a short stint up your way but could not find anything in my outlook *OCD contacts* . Chefs Toys come to mind however. |
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|