Quote:
Originally Posted by JCL
Old school here.
I use chain oil (designed for chain saw bars) mixed 1:3 or so with 30 weight, in a squeeze bottle with a small tip, so that I can apply it precisely. Not sure what brand, but a quart lasts three years or so. The chain bar oil has a stringy property so that it doesn't fly off. Spend three times as much time wiping it off with a rag as you do applying it, then there is very little there to attract dirt. I wipe the chain after every 150 km or so, relube, and wipe it again.
I got 5000 km on my Ultegra chain, and 4500 km on my tandem chain, despite the double load, with this method. We just replaced my wife's Dura Ace chain at 2500 km, which was early, but that was because of the cost of the replacement chain rings (which we want to avoid needing).
|
I am getting around the same life out of my chains. Aprox 3,000 miles (5,000 km give or take) My DA chain is about 50% and I just purchased a new chain. I am going to wait a little bit longer until I put the new chain on. I think that is a good idea to replace the chain sooner rather than later to reduce wearing out the DA cassette. They are not cheap!
That is real interesting and very old school how you are making your own home grown chain lube! I will be curious to start using Dumonde. I might clean my current chain off real well and start using it. The Dumonde rides real smooth and quiet on my dads bike.
09-29-2010, 09:38 PM
Threaded Mode
