Finally, after 2 years, got my 2004 X3 on the road, a few questions...
 

This will be my 2nd 6mt X3. The first one had 200k and rusted out from previous owners ripping door vapor panels.

This one i got for free, has only 107k on it, from people who couldnt fix it. So i fixed it over the past few years in my spare time and now its the road! Its a 2.5i, manual seats and hvac, but has the heated steering wheel, love that in cold vt mornings.

Heres my issues i need help with.

1, the manual hvac controls. They all work, but the last knib for air direction changes nothing. Where do i start there?

2, i know the pano roofs are a very common failure, mine is too. But i want to first want to check the fuse on the motor, as nothing happens. Where is it?

Thanks again!

It's a bit hard to investigate your vehicle without knowing what it is, but for my diesel the panoramic sunroof is fed by fuse 46, from Fuse 108. 46 is in the glovebox, F108 is near the battery in the rear. If you do get it working, it would pay to go through the initialisation procedure.
Sequence of the initialisation
Press the operating switch for the panorama glass sunroof to ”Lift” and hold it there. After approx. 15 seconds, the operation starts automatically. The initialisation runs as follows:

Panorama glass sunroof is lifted
Sliding panel opens completely
Sliding panel closes completely
Sliding panel opens again completely
Panorama glass sunroof is lowered
Panorama glass sunroof opens completely
Panorama glass sunroof closes completely
The entire operation takes approx. 75 seconds. The switch for the panorama glass sunroof must be kept pressed during the initialisation. If the panorama glass sunroof switch is released, the procedure must be repeated.

After the panorama glass sunroof has closed again, the switch can be released. After approx. 5 seconds, which is required for data storage, all the functions of the panorama glass sunroof can once again be operated using the switch.

Important
Re-initialisation will be necessary after conducting repairs on the panorama sunroof.

Note: If the sunroof stops before reaching the end position, keep the switch pressed and wait for at least 15 seconds (deletion of initialization values). The sunroof then continues to move. Keep the switch pressed for 1 second when the sunroof reaches the end position.

Thats great info! Thanks!

Ugh now my power locks are choosing when to work. Key battery (only key i have) is dead so i gotta unlock wuth key (double turn wont work) and then use the intwrior button...