top bin x3
 

Hi all
any one tell me how I can remove the top bin on X3 dash as I wish to take the 2 wires from my Origin B 2 speed camera box and run them out of sight in the back of the dash? any help please

hi all,

yeah i could do of knowing the same also , as ive got hold of the x3 on board monitor so i need to remove the storage bin thing and fit the monitor in its place :confused:
cheers

Hi

The top storage bin with flip up lid is secured with two screws accessed from the lower front of the storage unit behind the central fresh air vent.

To remove the air vent, first pry out the hazzard+central locking switch and unclip the connector, then simply pull the vent out forwards, using a soft plastic prying tool to separate the vent from the dash. Be careful not to pull too hard. The vent grill is also attached to a bowden cable (like a cycle brake cable) that needs to be released. Once removed the two screws holding the storage bin are visable. Don't drop them into the dash - use bluetack or magnetic screwdriver to avoid endess rattles !

Storage unit pulls upwards and outwards from memory

Hope this helps
David :thumbup:

thanks for the information david
daverob

cheers for that mate...

clive:thumbup:

What's the best way to pry out the switch?