|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
03-20-2006, 03:10 PM
|
|||
|
|||
|
top bin x3
any one tell me how I can remove the top bin on X3 dash as I wish to take the 2 wires from my Origin B 2 speed camera box and run them out of sight in the back of the dash? any help please 
|
| Sponsored Links | |
|
|
|
|
#2
03-21-2006, 07:06 AM
|
||||
|
||||
|
hi all,
yeah i could do of knowing the same also , as ive got hold of the x3 on board monitor so i need to remove the storage bin thing and fit the monitor in its place  cheers
|
|
#3
03-21-2006, 02:17 PM
|
||||
|
||||
|
Hi
The top storage bin with flip up lid is secured with two screws accessed from the lower front of the storage unit behind the central fresh air vent. To remove the air vent, first pry out the hazzard+central locking switch and unclip the connector, then simply pull the vent out forwards, using a soft plastic prying tool to separate the vent from the dash. Be careful not to pull too hard. The vent grill is also attached to a bowden cable (like a cycle brake cable) that needs to be released. Once removed the two screws holding the storage bin are visable. Don't drop them into the dash - use bluetack or magnetic screwdriver to avoid endess rattles ! Storage unit pulls upwards and outwards from memory Hope this helps David 
|
|
#5
03-21-2006, 05:12 PM
|
||||
|
||||
|
cheers for that mate...
clive
|
|
#6
03-21-2006, 09:37 PM
|
||||
|
||||
|
Quote:
__________________
2010 528Xi I demand justice. Or, if there must be injustice, let it be in my favor. Reynold's Wrap: it's not just for hats anymore. Quote:
Quote:
|
|
| Bookmarks |
|
|
|
|
Linear Mode
