A couple shots of the new stance
 

Friend and member on here (B-M-W) coded the X to sit lower. We lowered the default height by 19 mm's. The idea was to have it sit as the access level height at all times, but I think it's just slightly lower then that too, no complaints here :cool:

Also slapped on some 25mm spacers up front to compliment the 30mm's in the back

Here she is


http://i.imgur.com/hBaVjqa.jpg?1

http://i.imgur.com/v3fMzPP.jpg?1

http://i.imgur.com/5LnFO8b.jpg?1

http://i.imgur.com/ttFr4DL.jpg?1

http://i.imgur.com/6mZegdg.jpg?1

http://i.imgur.com/81UhIm1.jpg?1

http://i.imgur.com/FFpfO2g.jpg?1


Thanks for looking, and as always thank you to all the members who provide and contribute to the wealth of information on here

Looks Great!

Care to share how you coded the settings thru GT1?

Hey thanks, that would be a question for Mike, his handle on here is B-M-W. He has also generously coded my windows and sunroof to be able to close with my key fob and some other goodies like being able to have my hi-beams on with my fogs.

Right now we're trying to figure out how to code the "off road" height setting to not disable automatically at 50 kph, that way I can raise the X to the factory height at will and travel at any speed I wish without it automatically switching back. (the standard height drives a little nicer and softer, for when wife and kids are in the car ;))

Ride height was coded with INPA. I offset all 4 values by a positive 19.

The other goodies added was done on NCS expert. I might start a complied list of codes that can be altered, but for now you can dig around here and find most of them like, changing KOMFORTSCHLIESSUNG_FB to activ on the GM3 code will make your windows and sunroof roll up via the key FOB.

Pretty much all the possible codings for E53
http://www.xoutpost.com/bmw-sav-foru...cs-expert.html

This one has a lot of info too. Problem is you have to sort through several pages to put it all together, and some of the info is incomplete. It would be nice to have a single post with everything listed.

http://www.xoutpost.com/bmw-sav-foru...ot-forget.html

Looks sharp! The spacers worked out perfect.

I really need to find the front flares and RB's I just get sick at the thought for dishing out $1000-1200 for them :(

^Agreed. car looks gorg!

Thanks Fellas will give it a go at INPA.

I do "MOST" of my coding via PA soft and Navcoder.

I find the other software to be to laggy and unresponsive.....maybe my PC.

Sorry OT.

I have a super slow laptop I use for this work. INPA and NCS expert run as fast as I can hit the buttons. ISTA on the other hand takes right at 20 minutes just to read my X! After that though it's not that bad. On a really nice laptop the same procedure can be preformed in about a min. Same procedure, on ISTA, at the dealer takes about 2 mins......