Xoutpost.com - Need some opinion on this engine. Am I screwed?

Page 6 of 6

Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - Need some opinion on this engine. Am I screwed? (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/104822-need-some-opinion-engine-am-i-screwed.html)

upallnight

10-11-2016 04:50 PM

Remove all the plugs and put the starter back on the engine and crank the engine until no more water is coming out. Before cranking the engine buy some fogging oil and give each cylinders a good spray.

jopecasa

10-11-2016 06:05 PM

Quote:

Originally Posted by TiAgX5 (Post 1089872)

If I was in your position, I would tear down both motors, send the best block and heads to a good shop for machining/refreshing, then rebuild one good motor with best parts from both motors.

:iagree:

All times are GMT -4. The time now is 07:38 PM.

Page 6 of 6

Show 200 post(s) from this thread on one page