Xoutpost.com - Bleeding E53 ABS/DSC help needed

Quote:

Originally Posted by FourPointEight-is (Post 1135380)

I now have my software working. It turns out my cable requires Pins 7+8 soldered together - once I did that, INPA can read the DSC ECU (amongst others)!

I can even use ISTA-D with my E53 now.

The downside is - the cable probably won't work for any newer BMWs. That's fine, I'll order another.

Hello,
I soldered pin 7 and 8 exactly in the picture but both INPA and ISTA not working at all.
I also checked the cable pin out, pin 8 is normal no connection. Not sure where FoupointEight got this information?
Please help.