6 Stack CD player not working
 

Hi , just wondering if anyone has had any issues with their 6 stack C player not working ? You load the stacker assembly with the CD's and install it into the player . As you watch it the stacker selects 1 at a time inserts the CD and then removes it then goes to the next one and so on .It then stops and the message on the head unit says no CD's are inserted.Anyone else had any issues ?
Thanks

Sounds like a disc read fault - dirty lens or failed laser. Haven't had any issue with my X5 CD-Changer but I've seen this often in other units.

You could try cleaning the lens as a first step... opening up the player, not using a lens cleaning disc.

I replaced my 6cd stacker with a Grom Audio unit. Instead of a CD I just rip my music onto a USB drive and make six folders that I place my music in and that I can control from the MID.

If you want to buy my old 6 CD stacker unit hit me up with an offer. Shipping will be from 60616 USA.

What brand is your old 6 CD stacker unit? Does it display artist and song info?

Hi I will have a go at doing anything , what sort of cleaning would it need . Blowing off with air, wiping with a cloth or using some form of cleanser ?

Thanks

You'll have to remove the played from the car, open the case up and then locate the laser (lens). Start with some air, via a camera lens puffer/brush device if possible (NOT compressed air!) then test the results. If still no read then attempt a very careful lens clean with a microfibre cloth and iso-propyl, as shown in this video (although I don't use a screw driver...): -

https://www.youtube.com/watch?v=z25Saj8uNxg

Once dry, re-test again. Not a sure fix but it eliminates the possibility of a dirty lens being the issue. And while you're in there cleaning it you can check the laser sled/arm is clean and free of dust bunnies etc. :thumbup:

Thanks Bro , I will let you know how I go . Regards Darren

Good day!


It's a typical problem in these changers, caused by old grease. My even didn't eject a stack. I've got mine repaired, just by getting rid of old grease and putting a new one.

Disassembly - clean - new grease on friction parts - assembly - enjoy = PROFIT!

If links are allowed here, I can put a guide here with pictures.

^
Mine was doing the same. It won't eject the stack.
Removed it all together and replaced with Grom. :)

Hi there , well I have pulled it apart cleaned off all the old grease and re-lubricated. I have put it semi back together to do some testing first.The mechanism seems to work fine picking up the first CD feeds it in spins for a very short period of time and them re-ejects and feeds in the next one and the same thing happens for the next 5 discs. Shouldnt the disc be spinning continually after it is fed in as it seems to get a start on and then stops, when it stops it ejects the disc and puts in the next one ? Any ides what I could do next ?

Thanks