Xoutpost.com - Need INPA/EWS help PLEASE!

Xoutpost.com (https://xoutpost.com/forums.php)

- X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)

- - Need INPA/EWS help PLEASE! (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/111133-need-inpa-ews-help-please.html)

I cannot open your attached images.

My guess.... IKE and EWS checksum.

Re-inspect cluster connection .

Andrew, It is a v8-I have looked inside ECM/box in engine compartment and I don't see any fuses. Are you referring to early cars, say pre 2003? Or am I just not seeing what you are referring to? This issue is driving me crazy as to what could be problem. I continue to research solutions, checking wiring/fuses, etc. My next step is to try my OBD cable on my E39 or my other E53 and make sure I can access the DME on those to verify the cable is fine. The work goes on....

Quote:

Originally Posted by andrewwynn (Post 1172670)

Feels like a fuse situation. You have i6 or V8? The 8 has a power supply inside the ebox with a fuse or two. Unless you can get the fox to see the DME, it's not likely the rest of the car will see it either.

Need INPA/EWS help PLEASE!

The one I worked on was 04. There is a little power supply unit in the e box when that fails causes all sorts of hell.

I think it might be called the IVM integrated voltage module