Xoutpost.com
Page 2 of 3 1 2 3
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Programming X5 KMBI/Cluster No Reverse Lights W/Manual Transmission -- SOLVED (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/111347-programming-x5-kmbi-cluster-no-reverse-lights-w-manual-transmission-solved.html)

RocketyMan 01-13-2020 05:10 PM
Quote:
Originally Posted by Clavurion (Post 1175668)
If there are no reasonable doubts that EWS was changed or hacked and everything seems to work correctly I don't see much point wasting time trying to calculate ZCS again. Zeko and other similar softwares have their flaws and many things should still need to be manually verified.
I'm not entirely sure the EWS was or was not changed. It would just be nice to actually verify to be certain.

Bmwe5320023.0 09-07-2021 03:22 AM
Hmmm interesting you were able to code ZCS to your cluster.
I replaced the cluster, don't have the tamper dot, but I'm not able to code it to the car, it gives me an error

https://www.bimmerforums.com/forum/s...6#post30725686

https://ibb.co/gScg2w6

Bmwe5320023.0 09-07-2021 03:24 AM
My new cluster thinks the car is 4.4l with air suspension.
However my car is 3.0l with no air suspension and I just want the cluster to display everything correctly without errors

RocketyMan 09-07-2021 11:26 AM
Quote:
Originally Posted by Bmwe5320023.0 (Post 1209255)
Hmmm interesting you were able to code ZCS to your cluster.
I replaced the cluster, don't have the tamper dot, but I'm not able to code it to the car, it gives me an error

https://www.bimmerforums.com/forum/s...6#post30725686

https://ibb.co/gScg2w6
I would start a new post and reference this one. Maybe I can help assist.

New problem, new car....new thread.

vbelsky 09-07-2021 09:16 PM
Write the following to the IKE/KMBI, EWS, DSC, etc. in NCSExpert:

GM 80130000
SA 200B80100889C80D
VN 0036627AB7

Select "calculate checksum" when you overwrite

Bmwe5320023.0 09-07-2021 10:40 PM
Quote:
Originally Posted by vbelsky (Post 1209291)
Write the following to the IKE/KMBI, EWS, DSC, etc. in NCSExpert:

GM 80130000
SA 200B80100889C80D
VN 0036627AB7

Select "calculate checksum" when you overwrite
Tried but didn't work


https://i.ibb.co/MZrDMZQ/20210907-200244.jpg
https://i.ibb.co/bPfXJKG/20210907-200306.jpg
https://i.ibb.co/cFrq3GX/20210907-200531.jpg
delete duplicate keywords

vbelsky 09-07-2021 11:58 PM
Quote:
Originally Posted by Bmwe5320023.0 (Post 1209294)
Tried but didn't work
You did it wrong. You need to do ZCS_SCHREIBEN (German for ZCS_WRITE) first, then SG_CODIEREN

Bmwe5320023.0 09-08-2021 09:03 AM
Thanks, I'll give this a try.
Just wondering what's special about your codes?
I used a decoder on your zsc file, and it adds a bunch of modules/options that I don't have in my car and removes Xenon lights, which I do have.

Bmwe5320023.0 09-10-2021 06:23 PM
I tried keeping my numbers.
First command worked, but not the second

https://i.ibb.co/s27gCdN/20210910-160614.jpg
https://i.ibb.co/Lgt86GJ/20210910-160537.jpg

RocketyMan 09-10-2021 08:13 PM
Quote:
Originally Posted by Bmwe5320023.0 (Post 1209465)
I tried keeping my numbers.
First command worked, but not the second

https://i.ibb.co/s27gCdN/20210910-160614.jpg
https://i.ibb.co/Lgt86GJ/20210910-160537.jpg
Okay...this is CLEARLY a different problem and perhaps a training/user issue.

Start a new thread and stop hijacking mine.


All times are GMT -4. The time now is 09:13 AM.
Page 2 of 3 1 2 3
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.