Xoutpost.com
Page 3 of 4 12 3 4
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Rear subframe bushings (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/112519-rear-subframe-bushings.html)

Purplecty 11-13-2020 05:44 PM
Will this tool be sufficient?

https://www.ebay.com/itm/174502460097

Fifty150hs 11-13-2020 06:12 PM
Quote:
Originally Posted by Purplecty (Post 1194719)
Will this tool be sufficient?

https://www.ebay.com/itm/174502460097
Looks like the tool I have.

nickt5174 11-15-2020 02:09 PM
Quote:
Originally Posted by Purplecty (Post 1194719)
Will this tool be sufficient?

https://www.ebay.com/itm/174502460097
That's the one I used. A lot cheaper then what a shop would charge you.

Do yourself a favor and buy a 1/2 24mm deep socket and long breaker bar.
That will get you half way there. You will have to switch to a big adjustable or a 24mm open end wrench for the last few turns to pop the bushing out.

Purplecty 11-15-2020 02:22 PM
Quote:
Originally Posted by nickt5174 (Post 1194811)
That's the one I used. A lot cheaper then what a shop would charge you.



Do yourself a favor and buy a 1/2 24mm deep socket and long breaker bar.

That will get you half way there. You will have to switch to a big adjustable or a 24mm open end wrench for the last few turns to pop the bushing out.
Awesome! Thanks for the tip!

puddinboo 11-15-2020 02:39 PM
I'm seeing those kits for about 200.00 canadian

2003 BMW X5 E53 M54 engine,253512KM

Purplecty 11-17-2020 06:34 PM
Well that came too fast!https://uploads.tapatalk-cdn.com/202...ed431a59be.jpg

puddinboo 11-17-2020 07:02 PM
Let me know how it goes. I might be doing this next year. Or I should be doing it .
Quote:
Originally Posted by Purplecty (Post 1194915)
2003 BMW X5 E53 M54 engine,253512KM

wpoll 11-17-2020 08:27 PM
Quote:
Originally Posted by nickt5174 (Post 1194811)
That's the one I used. A lot cheaper then what a shop would charge you.

Do yourself a favor and buy a 1/2 24mm deep socket and long breaker bar.
That will get you half way there. You will have to switch to a big adjustable or a 24mm open end wrench for the last few turns to pop the bushing out.
I bought a 24mm ratcheting spanner for just this job!

https://ae01.alicdn.com/kf/HTB1HxfvN...g-Wrenches.jpg

Purplecty 11-17-2020 08:29 PM
Quote:
Originally Posted by wpoll (Post 1194924)
I bought a 24mm ratcheting spanner for just this job!



https://ae01.alicdn.com/kf/HTB1HxfvN...g-Wrenches.jpg
Link to this tool?

wpoll 11-17-2020 08:36 PM
I purchased something like this...

https://www.aliexpress.com/item/32858643682.html

But more likely you'll want something local...

https://www.amazon.com/Irimo-454151-.../dp/B01089LIR6


All times are GMT -4. The time now is 09:20 PM.
Page 3 of 4 12 3 4
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.