![]() |
DSC off V.S. manual shift
I was doing a little experimenting last night. The thought crossed my mind to turn of the DSC to see if throttle lag would be reduced from a dead stop. I turned off the DSC and put the vehicle in sport mode. I guess I bumped the shifter forward putting in manual mode first gear without even realizing it. When I took off the cars acceleration seemed to be the same as with the DSC on, but when the vehicle reached the top of first gear it didn’t automatically up shift like usual. I was surprised to find the engine racing against a rev limiter and the transmission restricted to first gear. I immediately shifted to Drive and the vehicle resumed a normal shift pattern. I was fairly quick at recognizing the problem and I am very happy the racing RPM’s didn’t hurt my engine. I think this could be a possible situation in any X5 or X3 so I am posting this story to give everyone a heads up.
|
thanks for the tip, must go try it :thumbup:
how do you know if the DSC is intervening? my indicator in my gauge cluster doesn't blink like the one in the e90, although technically that's DTC... |
Yeah, did it two weeks ago. If memory serves, no auto
shifting at all in the manual mode. A friend of mine has a pepper and he says his will shift in manual mode if you don't. |
Quote:
|
Yes thats correct, it won't shift if the DSC is off and you put the vehical in Manual mode
|
Quote:
Needless to say the music was loud, and I was wondering something felt different. A look at the tach and I was at redline, and then it shifted. Now the question here, is whether or not DSC being off removes this auto shifting capability. It seems, as per one board member's experience, it does... I'll have to go try... |
Quote:
|
My car will not shift automatically as it approaches redline, even with dsc on. I think this is because of the Dinan software. I had it in first on time and didnt realize and I went all the way into the red. The tach didnt bounce?
|
I have a 4.8is and in manual mode, as far as I can tell the car will upshift and downshift for me if the revs get too high (redline) or too low (1k) (VERY frustrating). This is regardless of DSC (on or off). Not only that but I thought redline was 7k when it shifts at 6.5k... grrrr, I want my last horses!
|
Quote:
|
| All times are GMT -4. The time now is 07:36 PM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.